Search results

I have a MEP 701a with the one lung Onan, 234hrs on the clock great running gen, only the charging system seems to be offline. I tried to get the TM's From LOGSA but they are not avaliable to the public. Does anyone out there know if there is a fuse somwhere on the unit for the charging system?

I will agree you got some serious stones... Welcome to the group, Hi my name is Brian and I am an addict.....

The Manuals in question here are still "Classified" and not avaliable to the general public.... just like the manuals on the M1031 Contact Truck and several other pieces of equipment.... Hopefuly one day they will be avaliable....

Have you had the engine running yet? That looks like a 4 cylinder 65 horse Wisconsin air cooled. Good engines.... as to the Gen portion I would start the engine and see what happens.... and take it from there.

Welcome to the Welder Club..... I also have one of these units... Nice welding outfit....

That was you ?!? Excellent.... I spent 2004-2011 at BAF.....

Well to answer a couple questions here..... First off on the pulling off the end thing.... the way it was rigged had something to do with the survival of my winch.... the center of the cable had been trimmed and was not in the origional .... I gotta watch it from now on though I got my...

More Pics

The second tank was a bit more of a PITA..... same diameter but 2 compartment and 40 foot long..... Had to chain the truck to a tree, ran a 2 part line.... she came out .... cables were twanging pretty good.... kinda added to the pucker factor it the fact I had left the winch in gear last time I...

Well with the high price of scrap and the inability to use them for their intended purpose the decision was made to remove and scrap these large fuel tanks. The first one was a single compartment 12 foot diameter 20 foot long tank only a single line was required to get her out of the...

I too need these TM's.... I have checked LOGSA and found nothing

Update: Found source of The "Growl"..... I was running it with no exhaust.... (Yeah Yeah I know CO is DEADLY but the barn is drafty) Installed some stainless flex tube from one of my Laundry units and now it is quiet ( Other than it sounds like a small turbine) I am using it to heat my 30 foot...

Umm...... What Governor You Talking About?..... Which Engine? ....... and I doubt it ...... and very.......

I have been working on a Benmar - Hupp Heater 20k BTU I can get it to fire but when operating it makes a "Growling" noise (Noise is more pronounced on High Heat) . it is NOT bearings or fan noise. it is the way fuel burns. The heater is brand new (Well right out of the box) I have the manual...

Just got it off .... will bar the engine over to check the ring gear.... I feel foolish should have caught it sooner....

Well I got the starter out..... and the "Bendix" is stripped smooth.... gotta find a starter now.

Well it has been a bad day..... While driving home from town I start to hear a rattle comming from the floor area of the truck I pull into the nearest gas station. Once I get stopped I smell the "Magic Smoke" smell.... (No NOT that magic smoke) grab my tool roll and run to the side of the truck...

I dont know if this will violate any site rules or not if it does I apologize in advance.... I am home from Afghanistan this summer and we are doing some clean up around the farm. I have a early '70's Mack Postal truck. The truck is wasted (MI Truck rusty ect)But the engine "Ran When Parked" ...

Rock On Brother.... I need one of the "Covers" for my shelter if you have not destroyed or scrapped them....

Karl, I am pretty sure they are either glued or epoxied in there. I would cut the center out of the panel, Then take the remainder out one side at a time.... I dont know of any solvents that would dissolve whatever is there with out doing more damage than it is worth... (That is even if you...