Search results

Here is the post about my m919. There are clearance issues on the front (rim and brakedrum) http://www.steelsoldiers.com/5-ton-up/39263-m919-gets-16-00-zxls.html http://www.steelsoldiers.com/5-ton-up/42177-m919-harvest.html Ross

Does anybody know a reputable company in columbus oh that would go and pick the trailer up and store it for a few days?

I got my keys here and extra lights as well Farmtronics Ltd. - Product Search Screen - Regina, Saskatchewan Canada - Farm Electronics Instrumentation service, repair, and sales center.

There have been a lot of 915 and 915a1s sold recently they have the same small parts/fans (except the air switch only engages diff lock)

Towing With Wrecker Crane. .WARNING. • If vehicle being towed has inoperative compressed air system, emergency air and service air lines must not be connected between vehicles. Failure to do this may result in damage to equipment, or cause injury or death. • If the compressed air system of the...

2-20. TOWING WITH TOWBAR WARNING Personnel must not occupy vehicle in tow. Injury or death may result. CAUTION • Do not use towing as a means to start engine of vehicle with automatic transmission. • Damage to automatic transmission of disabled M939/A1/A2 series vehicles will result from towing...

I got a 5000g tanker in Columbus OH GL . The euc hasnt cleared yet but I may need it towed from the gl lot. I am bringing a m35a3 (using a converter dolly) from Wright Pat and dont know if they will let me on the base "in transit" . If somebody could pull the trailer off the base when it...

I bought 11 snatch blocks from Fort Carson GL and was going to have my uncle from Denver pick them up but hes having some medical issues. Could somebody here pick them up and store them for a few weeks? They would easily fit into a pickup. They need to be picked up this week. Thanks...

Id be interested in some.

The mechanical advantage (MA) of any simple tackle rigging is equal to the number of lines supporting the load, or number of lines that become shorter as power is applied to the winch, whether the lines are attached directly or indirectly through a block (fig 20) Your example is like the 2:1 in...

I have a ROPS for my JD450C crawler loader in Okahumpka, FL that needs to be picked up and either stored or shipped to me in Nebraska. It is roughly 50"x50" and probably weighs a few hundred pounds. It is the roll bar on this crawler loader. The owner can load it.

The winch will pull out more than just the tractor. Read the recovery manual here http://old.steelsoldiers.com/index.php?module=pagesetter&type=file&func=get&tid=1&fid=file&pid=63 Get some snatch blocks and read the manual

You need to consider a 915 series 6x6 ie 916 or 920. The tandem is rated 56000 lbs and with 16.00R20 tires (rated 14500 single) you wont be overloading stuff. You will enjoy the 400 horse and jake brake. Transfercase is air activated and you can turn it on to help make turns instead of...

I bought it. Ill keep you in mind if I dont end up using it.

after using my m818s during harvest in a lot of snow I can see a real need for a way to put it in 6x6 and not have to make the back tires spin to get there. Driving out of a field at 95000lbs and a 43 foot trailer I need the front end to be pulling to help turn and get away from the ditch on...

I think I need one of those

The air shift transfer case and lockouts are nice on a deuce or 939 series. If your building a serious truck think about going with a 939a2(engine,trans,airshift trans case,airbrakes too) The only downside to the 939 is if youre pulling a heavy load on soft ground you might have to go low...

I had to go to the bottom of a huge draw behind my house with my m818 to pull out my m313 so I could pull the like new radial michelin 11x20s to single out my 2.5ton. There is about 15 inches of snow and I couldnt make it up the steep hill so I hooked the winch up to a tree at the top of the...

thats a neat build, what is the crane rated for? I mean what can it lift? Does it have a winch too or only use hydraulics to lift?

Ill probably be putting a wet kit on my m915a1 at some point but havent checked into pto options yet.