Search results

The Hemmt wheels have clearance issues on the front of the 916-920. They have 24 inch wheels on them and the 20 inch hemmt wheels are too small for the brake drum. I used a grinder and took off the back driveshaft and ran the truck in low gear to grind the front drum down a little. The inside...

Well it looks like I got one of the m105A3 trailers at ft Riley ks. Looks like a neat trailer with surge brakes instead of air.

Dan, I have a m919,m915 and m915a1. I pull a grain trailer with the tractors. The 915a1 is a nice choice for ease of driving. I havent had any problems pulling 90000 lbs with it but today I was in a little bit of a damp field and the truck had settled in just a little. I couldnt get the...

Power you should have. Mine will accelerate up hills with 35000 lbs(truck and trailer). It loses very little with 85000lbs. Been hauling corn out of muddy fields with the m919 WOW!!. I had a power problem with my m919 and it ended up being a little filter ontop of the afc valve. The...

I bought a couple of 5kw MEP 017A generators with wisconsin 2cyl air cooled gas engines and need to know what oil filters to use. They are both missing. Thanks, Ross

I dont have any extra parts. I will paint the truck but I want to get the bigger box on it first.

Yep, all 4 of them. I rigged up a hydraulic pump on one of them to run a dump trailer. Ill get some pics when I get it done.

Been using the m919 to haul soybeans out of the field. Starting on Corn tomorrow. Got the IP problems fixed thanks to Steetbikedepo and Will Wagner. Thanks guys. Will, the problem I was having was a filter on the airline going to the afc(acutally threaded into the top of the brass...

great story and nice truck

Glad you got to take it for a spin. Im running the m919 with no muffler (see pic,it exits down)and its not much louder than with it. The turbo takes a lot of the noise out. The jake is considerably louder though...

Nebraska Iowa Illinois Indiana Ohio North Dakota South Dakota Kansas Oklahoma Texas Colorado

Thats great, Ive been using the 915a1 in the field and pulling 80k its a little sluggish coming off the line if it has smooshed into the ground a little. It works great on pavement and gravel roads though. I pulled out our c65 chevy with 500 bu corn last year(45000lbs). It had sank into...

mine is the one mounted and his is off.

Well his new pump is marked NTC-400 4128 CPL-0267 JL123004 The tag on mine is just numbers 393-3537-0185432B 3017808-26014-229 My engine plate says the model is NTC400 ID 093E(family) and 0393(cpl)

bob tailing is no fun especially when you can go 70 but have to go 35 because youre afraid of rattling to death. You will come to respect the people who build smooth roads and curse the idiots that make em rough.

here are a couple pics for the pic monsters

My afc valve on my m919 ntc400 cummins is not working. I think the bellows has a hole. I ended up hooking up regulated air to it and could make decent power but now my ip is leaking fuel. It looks like I will have to pull the pump and have a shop work on it. I found a NIB pump from someone...

I just ground the ag60 plug down so it would work with the military connectors. I just hooked up the blue wire to a momentary switch. I hadnt read about bypassing the resistors. Its been working fine, am I going to have probs with this setup?

Neat

The cat is nice for the extra gears but the allison is nice for driving. Im having some probs with my cat not shifting unless air is at over 100psi which is distracting when driving in town. Ill have to pull it apart after harvest. 4th 9th and 11th always work so at least I have that. I put...