Search results

Good morning, Flyingvan, well put and to the point. You've melted the grease out of our and other posts and got to the basics. One addition to your basic list we'd suggest, though, is to GET NAMES. In other words, contact by email or registered mail "Joe Bloggs, Code Enforcement Officer"...

Hey 3 star, we feel a lot of compassion for your situation, and we have been in your shoes. If we could suggest something: don't try to get information via phone calls, either contact "enforcement" types via email or certified letter, so you have a documented record of having tried to approach...

Hello all, rather than re-invent the wheel, I was hoping to get advice from someone with a ground mounted MEP 003 that had built a utility bldg./enclosure that would keep the generator protected but still allow access for service. Also, does passive exhaust from the building work best or the...

Thanks, guys, for all the helpful info. Will get on NewEgg immediately I get this posted. Related question: this generator is on a pad some 75 feet from the house. I want to enclose it before winter. Have any of you built a small utility building over a generator that make it easy to...

Hi guys, thank you so much. My problem is/was knowing where 1800 rpm is (no tach) Your answers are clear: adjust the rpm to the load 60-61.5 Hz at say 70% and call it good. On an unrelated note, we live about 1 hour from Fort Bragg and 2 1/2 hrs from Camp LeJeune. If anyone is picking up...

Gentlemen, after 2 years finally got the generator connected to the house. Started her up, the sparky checked the voltage with his amp meters and we have 120 and 240 V showing perfect. Turned off main and all breakers at the house, threw transfer switch over, checked voltage incoming, still...