Search results

where's the pics i want to see what everyone said couldnt be done :roll:

ya i think all the trailer sit close to the bed .but it should be easier to put a dump under a deuce bed than a trailer bed since the frame rails run the same way as the frame unless you extend the frame you will have a problem with the bed hitting the ground when it dumps,:roll:you can put...

i'm gonna be putting some back up lights on my deuce to but i also have a remote control spot-flood light i'm gonna mount on a pole light the convoy lights were mounted so i can use it to see in the bed or anywhere i need :-D

doesnt the rod coming out the back of the trans top cover move to the back when in reverse.it would be pretty easy to run a micro switch off of that so the lights come on in reverse only.then you could wire another switch to turn them on when you want if you want :roll:

fenders where braces attach # second the inside kick panels andthe the rocker panels and doors.also the bed will rust from the inside of the stake pockets and the braces under the bed

my god that muffler is bigger than the ranger in the pic.so much for being able to see to the right .that blind spot is so big you need a seeing eye dog to sit with his head out the window:roll:

you could have a syncro sticking or a gear that seixed on the main shaft from lack of lube .if one of the gears is working and all the others dont .the gear that is working is the one that is messed up.cuz the others are free and thats why it works in that gear and when you come out of the gear...

if you can do 70mph with 11.00s i guess i can do ninty with my 15.5s:roll::roll:

i drove mine 23 hours straight even though it should have been less .i went to ohio to pick up my expandable . drove straight down loaded up and drove home .i left the house at 4 am sat and didnt make it home till 6 am sunday .it took three hours to load up so driving time was something like...

i will take three .one med,one large,and one xl

:-Dpretty sure saturn surplus has them .congrats on the new toy

sounds good i'd do it. the a3's have a hyrdo winch they just put a hydro motor on the stock winch

the one with one is the tcc switch the other is probably the egr soloniod the tcc switch should be getting maifold vac.

nice looking tractor now you just need some trailers to go behind it:roll:

i do trans for a living i'll probably have the whole job done in two hours or so .i'm gonna cut my flywheel while i'm at it .

thanks for all the pics i'm gonna be doing mine this weekend.i just have to get a couple more parts.:roll:

ya they all do that . nothing wrong with them almost all tires have sidewall defects.if you have them mounted on narrow rims it will make it look worse

in the pic of the trans you can see the fluid sitting in the front bearing retainer near the splines on the input shaft and it is running out the weep hole on the front bearing retainer .not sure if there is a seal in the retainer or if it just has a slinger like a t-10 if its a seal it should...

wow sorry about the nose.ok looking at the pics i would say the trans is deffinatly leaking rear seal probably wasnt but the housing looked wet and it was wet above the housing which is probably from the gear oil being slung from the trans leaking.fluids dont run up hill sosince the back of the...

ya i like em as 6x6 since the rear suspension is what makes these trucks so good offroad.just single it out put some bigger tires on there maybe some lockers :roll: