Search results

M36A3 W/winch=RARE Question, I've read here that the A3 wheels are rated for 4,000lb each. My M36A2 W/winch & 900-20's weighs in about 15,750 plus the 10,000 on road cargo = 25,750lb The A3 has 6 tires that weigh about 250lb each It must be heavier than the A2 version yet 6 x 4,000(wheels) =...

1. it is harder to steer 2. yes 3. get the -10 operators manual 4. read the -10 operators manual

I have had some success with pushing the tire down so one bead sticks, then flip the assy over with the rim on something so the weight of the tire sagging helps get the other bead to where it needs to go.

order 4 gallons at a time from PAINTS for the best price. General Jims had some Gillespie on the shelf last fall. It can be shot with or without hardener, obviously with hardener will be better for durability and recoating year after yaer.

Also, Do not use bias ply tubes in a radial tire.

Running the 36" bias plys on stock M880 rims myself, so no real air pressure help here. I run 25psi. Depending on the 16.5 rim, I have been told countless times that 16.5 rims do not have the ridge that retains the bead. and that 16.5 tires will come off at pressure of 20 and below. This is true...

g503.com has a transport forum and a large membership in the PNW g503.com owner lives in Oregon too. Might try over there Lane

To me it looks like 395's on the bobber in the pics

If that was the case we'd all have them. Slight math error, it's 1400 x 6 = Yeah Right!

Good thing that's not near me, I'd be borrowing some cash in a hurry!

26 miles - hire a rollback wrecker should be less than $100

Well you came to the right place. Scroll down to the 5ton forums and start reading. There are many of the manuals on this site yet I've not been able get anywhere with finding and downloading them. Tons of info on the site. Probably a couple members near you too. I don't have any 5tons, so...

b1pig, check out www.roscommonequipmentcenter.com for good info.

No real suppliers in MI Lots of hobbyists and wanna be suppliers. GreatlakesMVPA.org great place to network for such things. and yes Ted G is a good guy, who does have a bunch of NOS stuff. Citizensoldier on here has also been refered to as a "trailer ho" I now have an extra compete deuce...

If it is hard to keep down, it must be spring pressure as any binding would reduce the force required to maintain a position. Gimp, one of mine got seized up over the winter.

Aquire a -10 operators manual, good reading! As an A2 owner I don't know much about the A3 I've read the 15w40 in the trans and also about changing it out. Shut off the other switches then pull the fuel shutoff (works for the A2) CTIS typically leaks, from what I've read it is usually the...

That's almost 2 minutes per lug nut!!!!!!!!!!! and all I need to know about that shop.

just a note to clarify some mis information posted above. 395's & 15.50 R20's are 46" diameter 1100/20's, 14.50 R20's are 43.5" diameter 900/20's are about 40.5" diameter There are two speedo gears for the Deuce, one for the 900/20's & one for singled 1100/20's. Will a speedo gear from a...

my 1st one was an expensive M36A2 w/winch the EUC was sent to BC on the afternoon of 12-24 and was approved on Monday 1-5 the next two I did were within 2 or 3 weeks of end of auction. I think it is just luck of the draw, sometimes they are overloaded sometimes they are not.

most pallets I've seen are 40" x 48" two 4 ft wide pallets in a 98" truck doesn't work well.