Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
m880 d200 dana 44 full time front hub&rotor new mopar: eBay Motors (item 200303462241 end time Jul-20-10 20:55:29 PDT)
DODGE M880 4X4 MOPAR 75-79 W200 NEW NOS HUB AND ROTOR: eBay Motors (item 330428589296 end time Jul-27-10 19:12:14 PDT)
autozone.com had them for $149 a side
I should have said quicker instead of faster, I guess.
Once she's going, she cruises fine and you have to watch your speed/RPM's
Perhaps the injector timing is part of the lack of acceleration, I'll have to read up on that.
I would go with heat, which will expand the lugnut from the stud.
pull the valve stem out of the tire, so the heat doesn't build air pressure. ( this won't help the lug nut, it's just safer)
Jam nuts may work.
For those of you that have had or have both the M35A2 & M36A2.
Is your M36A2 noticeably slower?
I ask because mine is so much different from it's little brother.
Sure the M36 is 2,200lbs heavier to start with but I'm wondering if my 1972 motor is geetting tired.
M36A2 w/ 11/72 1-C motor, D...
I bough 16x8 " wagon wheels from summit racing for something like $39 each new, it's been a few years but dang your local junk yard guy sounds like a crook
Brush Fire apparatus.
Roscommon Equipment Center specializes in conversion of ex military vehicles into usefull wild fire equipment. ex military vehcles are given to the Forest Service.
The short wheelbase offers obvious manuverability advantages over a std pickup, in a wild fire enviroment...
The Penske trailers I've seen are SAAWEEEET!
Either Yall Haul or Penske's 26' trucks will pull their trailers just fine. and with that size tow vehicle, too much tongue weight shouldn't be an issue.
Been about 10 years since I used a 26' Yallhaul & car transport.
Have since bought my own...
S.O.P.
A requirement when a unit turns in or disposes of a vehicle.
The unit id numbers on the front and rear are to be removed or painted over.
Not much different than you or I when we remove the license plate when we sell a car.
No black outlines
I don't know the origin of the 1st two pics, they appear to have gotten carried away with the black.
3rd pic are my trucks with the std MERDC pattern
change the green to tan
Most of what I've seen for desert camo on the old 1 1/4 tons is all tan
For 3 color desert just change colors of the 3 color nato pattern
The above is MERDC pattern, which all views have been posted here somewhere.
Maybe not in desert colors, but the pattern is the same
Necking it down to 3" and extending it has restricted the air flow.
Which may or may cause a problem.
A little bracing should be added.
Mt Holly, is that Michigan?
The M880 series trucks were not made with brush guards, after delivery to the Military. some may have procured brush guards and installed them on M880's.
Many non M series Dodges were purchased by different branches, these contracts may have specified brush guards. These contract Dodges spanned...
950R16.5 is what they came with.
they will take any standard 8 lug with a 4 7/8" center hole
older chevys had only 4 3/4"
and 99 & up Fords are metric.
Very close to a 31 -10.50
15 inch rims will likely rub on the front calipers.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.