Search results

That is starting to make me think I got the wrong ones.

Jeep left my ao about 45 mins ago headed to mobile.

Napa had to order them from the manufacture so they told me no refunds. I'm weighing my options trust me.

Well I have run into a little snafu. The studs I ordered were shorter than the original ones. Can't return them as it was a special order item from napa. Got the part numbers from a thread on here, but that is in the past. Put the hub assembly in the fmtv wheels and the stock studs don't even...

I got it off, used a bigger hammer.

I've got all the inners of the hub soaking in a bucket of zep. I'll look at the nut later. The spindle looked fine from just glancing at it, I'll loom a little closer today.

I don't have the tm up in front of me, but is this the bolt that secures the inspection plate on the drum. If so that is a ribbed type bolt but has a hex head on the back.

I think for the rears and the other side I'm going to use the sheet metal truck. Place a sheet of metal under the tire, add a little lube and just slide the tire and hub assembly out as one whole piece. No breaking your back and you can use the tire as leverage.

Well got a little done today. Put the finishing touches on the fuel pump assembly, and got the drivers front hub and drum assembly off. Had to use a 3/4 hammer impact to get the outer nut off, the 450 ft lb impact wouldn't budge it. I'm going to put some heat shrink on the pump assembly but I...

I saw that video the other day. It came up on my facebook feed the other day and I shared it. I laughed hard at it.

Everything in ca causes cancer, lol

Yep. I popped one in the hub and drum assembly on the front and it won't even grab enough. I'm going to go to a semi shop and see if they might want them.

Man it took me almost an hour just to get the hub and drum assembly off on the front. I think my motorcycle jack idea is going to get scraped and go to a engine hoist with a ratchet strap. Let me figure this out and see how much I like the truck after I do all 6 and then I'll give you an...

I like the weld sticks, easier to work with and sets quicker.

People will laugh at this, but my wife is the far from mechanically inclined. Seeing her trying to help me with the belt on the deuce I brought to Fuzzy was a little hilarious, at the same time me trying not to cuss up a storm knowing she has no idea what I'm talking about. Telling someone who...

Cool, no problem. That sucker was one there. Took the 3/4 hammer impact a few seconds to break it loose.

Mod you can delete, nuke, drop napalm on it.

Ok I want to post this as I'm out $200+ and I don't want anyone to run into the same issue. These studs are actually shorter in total length than the stock studs on the 5 ton. Was under the impression it was the it was longer, and because it was a special order item from napa I'm now looking at...

Hammer impact took it off. Way over torqued.

Yep, I just ran to my grandfathers and grabbed the hammer impact, cross my fingers.