Search results

the isolated ground is what makes it 24V.. they should be wired in series if nothing has been changed. Kinda hard to tell whats going on with no pictures. if some hack has been in the wiring and f-ed it all up... good luck. might just want to put full coverage on it and burn it to the ground.

yeah pictures might help a bit.

you got it . its probily the 1/4 rubber fuel line from the filter to the injection pump, or the injection pump its self.

there has never been a lift that I have installed that comes out all the same. Like wht was stated above drive it and see what happenes. Springs will settel over a couple weeks and they should equal out more.

well there is alot of bolt left.. you dont have to drill that out..... Soak it with PB blaster over night and use a stud remover. it will pop right out. IF not.. get a reverce drill bit that will drill it out and spin the bolt out.

if there was grease or dirt or water on the resestor then yes.. they will smoke... Remember they do get HOT! I have seen them smoke if sitting or have been washed or it has rained.... you get the picture.

dont drive on hard ball. Realy that might be it at this point. The rubber is degrading and not much you can do to stop it. covering the tracks with some sort of "gue" will just rub right off and be a waste of money. Just keep saving and drive it till the "tracks fall off" as the saying goes.

for the money and how long the wood would last, when we replaced the bed on my friends 5 ton we just used 1 x 4 (cut down 1x6) and painted it. looks just as good as the day we installed the bed 5 years ago. The stuff with the fungus on it must not be treated or painted wood.

how much for the take off?

Hey guys we are starting back on my friends 5 ton gasser and think we have tracked it down to the distributor is shot. Does anyone have a used one for sale or trade?

Huh? the transfer case is sprag or air shift... not the front axle

bla bla bla..... I made it every other year.....

look its hick vill IN... you dont really want to look in to the "ladies" (using that term loosely, o man that does not sound good) bathroom.

Really the bathrooms are ok during the week but get kinda nasty on the weekend. Really the night life is where the fun at haspin is.. night rides, camp fires, Westy almost falling in to the pond while peeing next to someones tent. Its a blast and if you leave at night you really miss out.

That is who and where my M813 cam from. The truck cost under $500 from GL but over 2K to ship just to the states and another 1k or so to get to Wisconsin. I know he has some connections so he gets a good deal and that was 5 years ago. There are sure some good deals out there if you can work out...

M151A1, M151A2, Military Vehicle Parts and Vehicles - TNJMurray

yes you can run a tube. Its ok, just make sure you get a tube that will fit your rim valve stem hole.

a trick is to brake the bead by using a 4x4 or larger and placing it on the tire and using a truck to drive up the board to brake the bead. EZ as pie.

you guys do know Haspin is better then the hillbilly hick GA rally right?

I stand corrected.