Search results

Glassk, you will not see the youtube postings with your current settings. If you click, tools, then tracking protection, the select block third party google site...., and disable it, you'll see the youtube vids. I have my blocking enabled as well, to avoid some advertising issues as well as...

Great, thanks for sharing that info. It may help someone else later on. This should have been in the parts wanted ads, not the 5 ton forums.

You will need to lengthen your driveshafts. As well as your brake lines.

Disconnect them, then charge them. Then diagnose what is causing a draw. There is a diode between the 24v buss and the negative buss that is known to short(go bad). It can simply be removed(no need for it).

Yes, this has been done and posted before. http://www.steelsoldiers.com/showthread.php?77307-bobbed-deuce-load-test&highlight=

Charcoal on a metal garbage can lid(yes, I still have metal garbage cans). Light it, let it burn down a bit, slide it under. Wait one hour or until truck ignites.

Kits... A kit would consist of less than $10 of hose. Not much profit margin in that, to help other that are not energetic enough to go to their local auto parts store. Add to that shipping. Including a VVR, would entail stocking an obsolete product, at unknown cost, only to resell it(and...

You did open the valve for the gladhand, right? Which side gladhand were you using? Only one has air with the truck running.

The FDC (Fuel Density Compensator) only regulates the fuel based on it's density, to maintain an even power output. It is not needed to burn multiple fuel. This has been covered in great detail, many times in the past.

Best of luck to ya!

No.

Whip out your meter and test the GPs and GP relay. You haven't said how you wired your GP relay, so we do not know. Maybe you have a bad battery cable or connection. Again, whip out your meter and see.

Get a 3d printer.

Post pics as you make progress.

A few questions you may need to answer to succeed. What's your budget? What do you want it to do? What is your skill level? What is your time frame for completion? I kinda think that if you need to ask if you can, then you can't.

A google search for, "14018671 gm" seems to offer a few places to order it.

What color are the wires in question?

I'm guessing you did not searche before posting and you did not look at the wiki or stickies first. http://www.steelsoldiers.com/showthread.php?64455-MEP-002A-and-MEP-003A-Replacement-Oil-Pressure-Switch Of course this has been asked before and posted.

Post 15, try clicking the link for some good info. Maintenance will be in the -20 or -24 manual.

In the past, there were many 1009 and 1008s up at FT Drum that has locally installed plows on them, used for on base snow removal. Now, there are still a few around but the Humvees have the plows on them. If I remember, next time I go past them I'll try to snap a pic and post it.