Search results

Neither has provisions for an in tank pump.

Front battery only. Scroll down and read some of the similar threads that you should have found when you searched before posting.

Confirm tdc with the valve cover off.

Just to close this discrepancy, I just rechecked my google results(was going to post a screen shot for you) but I realized it indeed does say Portland(not Poland). I did not have my glasses on! rofl Either way, our rules ask for your state(I should have never needed to wonder or ask).

Here is what the parts TM has. 21 MOOZZ 19207 11609292 TUBE ASSEMBLY MAKE FROM TUBE, P/N 1 8689210 UOC:B48,B95,B96,437,438,444,445,446, 455,456,470,503,506,507,510,511,516, 527

No, it is not. You need to make your own new one.

Nope I meant Poland, it was the first Google search result. Our rules request a state listed in your location. For a few good reasons.

Try saving the TMs to your computer. (right click and save) Then they will open easily. The copper line is standard soft copper line.

You are located at the Poland International Airport?

Hinges are adjustable, as is the window stops(front and back).

Please post your phone conversation, so we can all learn...

Search PPV or pressure protection valve. This problem has happened to many guys and this has almost always been the issue(especially now with cold weather). Proper air system maintenance is a must with these trucks(more so than older MV trucks).

If you google search the NSNs and look at the "parttarget" results, you may be able to compare actual measurements or manufacturer info to confirm that they are different.

To correct the smiley after you posted(and see a smiley instead of the text you wanted), click edit post, then click go advanced, then check the disable smilies in text, then click save changes.

He was referring to the PCB(protective control box) in an M939 series truck. A M915 is not an M939 series truck. I don't know if they use one. The -20 level tm should have a troubleshooting section for "does not start", have you tried reading it?

6 or 10 lug nuts.

If you would capitalize, it would be much easier to read your posts(and it's out site rule).

Replaced them with what?

Cost. It cost less than a dollar to cut the existing red wire(on the d/s) coming out of the resistor bank, and crimping on a 1/4" ring terminal. It will cost you $10-20 to buy a battery cable. Also, you will need to replace the stock battery terminal bolt with a longer bolt. I personally...

The advantage is, one glow plug can burn out(and they do) without causing the rest of them to burn out. The down side(if you think it is) that you will not be able to slave start the truck if the front battery is open celled(or will not take any charge). As the Glow plugs can't get 12v off the...