• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. doghead

    Noise suppression on gas gennies

    And if they need a drink, they'll have 50 gals of warm water...
  2. doghead

    Looking for a cucv m1009

    You can build one. $1500 should get you a set of axles.
  3. doghead

    Noise suppression on gas gennies

    Another way to look at it, $2/hour for the mep-002a or, $8/hour for the mep-017. That's 12 gals of diesel/day, or 48 gals of gasoline/day. If fuel is difficult to aquire... A new modern genset would probably burn about 1 gal/hour. This is a very generalized rating.
  4. doghead

    TH400 Transmission to LDT-465 Multifuel Engine

    Oh, and gonna need a custom built torque convertor, to match the engine power output/max rpm..
  5. doghead

    TH400 Transmission to LDT-465 Multifuel Engine

    It would be easier to cut the bellhousing off and fabricate an adapting belhousing, and weld it to the housing. Big fab work. Need to know his deadline and budget.
  6. doghead

    TH400 Transmission to LDT-465 Multifuel Engine

    I'd like to hear about your body, frame and suspension mods, to accept and LDT. Only one of the bolt holes will line up... No adapters.. What's your deadline date?
  7. doghead

    Noise suppression on gas gennies

    Fuel consumption for the gas unit is about 4 times what the diesel is. I'd loan him your mep-002a. It's heavy enough that most would not be able to steal it. Stealing generators in a storm area. What a bunch of animals. Makes me want to assist them(not). After the storm, see if you can...
  8. doghead

    bolt size

    Easily found in the -20P TM. Once you have the part number, Google it! 5305-00-071-1787, 12-720, 1245509, 179859, 1863HX1, 71145-86, B1821BH044C113N, MS90728-86
  9. doghead

    MEP-003a Start failure

    If you mean the DC circuit breaker(on the control panel), yes, push it back in , to reset it.
  10. doghead

    MEP-003a Start failure

    Do you mean 3KW generator, or do you have an mep-003a 10kw generator?
  11. doghead

    Would you pick a 923, or an 813?

    It is not a design flaw.
  12. doghead

    2.73 rear end ratio no kidding

    Any of these, it? cb1000h CB121 CB140
  13. doghead

    Mep-003a & mep-005a

    If your in Guyana, why does your location show Minneapolis Minnesota?
  14. doghead

    2.73 rear end ratio no kidding

    Did you original account have "bacon" in the name? any of these ring a bell? bacon225 Bacon4x bacon713 bacongreg5 BaconJack
  15. doghead

    2.73 rear end ratio no kidding

    Multiple accounts is against the rules. You should have contacted us and found your old account.
  16. doghead

    Would you pick a 923, or an 813?

    I'd buy both for those prices. It don't happen often considering scrap value is twice what your talking.
  17. doghead

    Am I better off buying from GL or private seller?

    Budget, capabilities, expectations, tools & equipment, patience.... All factors you left out, to help you make a decision. Knowing nothing about you leaves me with this advice. You'd be better of not buying a CUCV at all.
  18. doghead

    login from smart phone

    I remember when People were smart, and phones were just phones.
  19. doghead

    I messed up...Possible to retap the knuckle on my front axle?

    “We don't make mistakes, just happy accidents.” ― Bob Ross “All you need to paint is a few tools, a little instruction, and a vision in your mind.” ― Bob Ross
  20. doghead

    login from smart phone

    Sounds like a good question for the GL live chat.
Top