Search results

if i had the money for a M870, id also have the money for a 900 hyd. front winch to fit in the rear frame of the 819, or hyd. the gooseneck, or use the crane to set/unset the gooseneck and a set of hyd. landing legs to raise/lower, no matter what id figure a way to get it hooked, A M819/M870...

dont sand or grind the buds, will heat up the bud, have them turned down wet

MRS was one of the major off road dirt haulers along with k-dart and athery (not spelled right) years ago. thay made massive machines

if i come, ill be in my civi ride, hum , now im thinking 819 hum, 1 1/2 hour run, need fuel for 2010GAR, hum, can i do both on one tank il have to give this some thought, if my wife comes, then for sure civi

on the M870 trailer, is the drop gooseneck cable or hyd ????????, eather way, a perfect fit for the 819

Monica, there would be more then a good chance that a recovery/ repair mission could be authorized, being that you are right in town

" what makes you think that the front would be any different? " the bud nuts are designed to set into the inner rim and the outer rim so when the two rims are together there isn't any space between the rim centers, pulling them TIGHT together, the front hub does NOT have the set in for the...

I dont care for metalizing mainly because unless the item is heated in a oven, then the flame-spray-metal then back into to oven to cool, the item will have a hardness problem and/or a hot spot right past the repair and become brittle.

what day and the best times would be the best to drop by when the most people and trucks are there???????

one thing to remember with the rear in place of spare tank is a rear ender, this could cause a riped open tank, also with the extra weight behind the axle, the rear will be riding a lot lower

. usung bud nuts does not allow the rim to sit against the face of the hub. He has a GOOD point, the bud nuts will allow the center of the rim to FLEX and in time crack, I had not fhought of this till his post

If the speedy sleeve is done right, it wont regrove, I have been using speedy sleeves for at least 30 years. the reason most sleeves regrove is that the old grove is not FILLED. use hardening epoxy. sometimes it is not possible to metalize or the heating will call for a retempering. the biggest...

There is some other things to consider in shear pin use. 1----the fit between the driven and the drive part, if there is slop at all ( not a VERY close fit) it will shear under a lot lower load then the specs call for, the MORE slop, the less load that can be handled. these parts should go...

I would guess a plate with a W on it, lets everybody know that the WIFE which out ranks a general in the MV hobby world is aboard.

welcome , GA must have something in the air to attract MVers, our numbers keep growing, where in nw ga. are you

:ditto:

a few pics of the 819

Heres a few pics of flying the flag

in Vietnam we Never took from ourselves, but the other outfits were fair game, get a vehicle, a gen set, a piece of equipment, ect. repaint if needed, put new reporting marks on, these reporting id were off another same kind item that we had so in realty we now had TWO of the same item, which...

today is the day LETS :grd: