Search results

no, I did that, the adaptor tip WILL NOT FiT, it wont pivot, that is WHY I bought the 11/2" x 1"adoptors

the distance between thr pin hole on the lift bracket and the bumper is not enough for the 1 1/2" adaptor to fit

IF the flag use is that bad, Id volunteer to be the flag replacement

"I can't even lift an end without taking them apart" http://www.steelsoldiers.com/5-ton-up/57637-acceresory.html this is why this accessory is a necessity

nopics I have the tow bar from he11, I did find a set of adaptors with the 1"tow hole from somebody on site, I think SEMIS there is not enough clearance to use the 1 1/2 pin hole with bushings, the adapter won't fit

Progun, to solve the flag display thing is easy, just have her REMOVE the flag and then RETAKE the pics Mud beat me to it

can anybody answer these questions 1- how long has the Aberdeen show been going on 2- how many sights(locations) has the show been on 3- how has the cost for the participants increased from the start to now 4- what is other draws or functions besides APG Just remember Aberdeen has been going...

thank you master searcher

When I worked at the quarry, we had dump come quite often , he had mounted a dump box over the fifth wheel, he said that could pull the box off in about 15 min., he had a A frame that he drove the dump under, raised the bed and secured it to the frame, he had legs that attached to the rear...

We are talking about a Aberdeen type show so a few questions, 1- how long has the Aberdeen show been going on 2- how many sights has the show been on 3- how has the cost for the participants increased from the start to now 4- what is other draws or functions besides APG When I went to 99...

A very important asseresory for the tow bar from he11

"Chris (steelsoldiers) has a good thread with pictures on rebuilding them. " ????????????, gave up looking in search, any MASTER searcher that can help

no not larger in dia., and yes on the nut

if you were a real nice guy, you would have a few extras picked up

"Meadows of Dan, Virginia " looks like CRANETRUCK found his extra snow chains

"I saw this in random pics" Gimp, these ARE the first 5 words in the first post

you went to be REAL CAREFUL about grinding and getting the buds hot, they will crack right behind the rim flair, also if you grind, the finished product needs to be dead on SQUARE, other wise, when tightening down the bud, you will put a side pull ( load) on the stud which in time, with use...

we don't have sealed drums, the mud and crap can still get in, can get into the wheel cylinders, the axles under a deuce or a 5t are or were standard axles used in a lot of trucks and other applications, could be found with both hyd. and air, if you could find a OLD truck junk yard, most likely...

not sure civi market, I think its a USMC photo type

more