Search results

the air supply line to the trans air valves is cut, then air line to the flip valve, that back to the supply line, you could do the cut anywhere but i would do it under the trans cover floor panel, this will give a lot of room to work

it was on the truck when i got it, i could not tell any difference on the road, though off road is another story, in realitly this mod was done in the military to keep the front wheeles from turning with a front end lift recovery i would guess in case of front end damange ect. i would think it...

the answer is yes, and i can say without a doubt you can get stuck :oops: if you have the air cut off which means forget to check the flip valve just as a side note , the flip valve is a old mwo from m54 series days, though not many have it, it seems that it was done only here and there, the...

i believe you are confused , the terms LIKE NEW and CHEAP do not go together, you may find one or the other but not both in the same sentence when talking about a gun mount ring

i have seen a lot of trucks on gl with this mod

RE: Re: RE: PICS of The M543 Going Through Phases dave was straight with me when i got the 819 from him, i knew what i was getting and i thought the price was fair. there was NO GAMES played

goldeneagle, tanks are one of the things that tb from he=ll is used for, is that the one from tin

an air leak almost for sure, where the air leak is a whole ball game by it self

jason, you would be SUPRISED how small a air leak will cause this, does it surge at idle

RE: Got a 6.2 David, is that a wire cutter on the front of your tow rig, if it is you must really live in the bad part of town , you must know the meaning of URBEN WARFAIR first hand

tim aka timstrucks has some takeouts

in my opinion YES

my fuel tank on the 819 was like that after i had it steamed cleaned. i striped the paint off the bottom then fiberglased it, still holding good after 3 years

if bent, it wont come up

the valve hiit a piston and bent, the push rod cant move the valve so it bent, this can go on till something breaks, KEEP way down the RPN

not much room, i woulld think valve. i would even look for a bent valve or/ and pushrod

RE: Welder that sa-200 will handle 1/8, 3/16 7018 real easy

watch out using welding wire, it will be more brittle then safety wire, it will break easy, also stainless is a lot softer wire, it is not as strong as a steel wire of the same size, the only advantage to stainless steel is that it wont corrode in a damp environment, though it will corrode in...

trying to use the reasoning with the wife, that i need the 108 to set the spare tire in place on the 819

not turn signals, but trailer hand air brake