Search results

My Genset has 8 hours on an arsenal rebuild but....... The fella I got it from did some mods to the board the one that you move around to change between 480 and 220/110( he made copper jumpers ect) to make it single phase and to be honest I am not sure that even worked . It sat for over a year...

Has anyone on this board and in Ca actualy been pulled over and cited in an m35 and if so what did they do to you?

Hey Fellas Thanks for the info but I also think I was not 100% clear I suspected a coolant leak as I was a gallon and change low on coolant but the stuff leaking on the rad hose alternator bracket, fan and sprayed on the hood is oil so where on the front of an M35 motor can oil leak what...

Hey Fellas Hope all you east coast guys are keeping warm I dropped a post a while back about smelling Coolant that has not gone away but now I think I have a larger issue. I was low on coolant about a gallon and 1/4 But I have oil dripping in small amounts at the front of the engine showing...

Nicely done I love seeing trucks that are made to look very Nice without a huge shop and a laydown yard. That was my goal when i did mine. Did you detail out the inside as well? looks great. Jerry

Yes I agree but I would hate to be the poor S.O.B that has to stop an Abrams No mater what side it is on.

Just a thought my Nephew is a Marine tanker he told me that or at least the scuttlbutt is that the U.S. military will be phasing out heavy armor as there is nothing a tank can do that a Helicopter cant and the chopper can trasport itself ( I asked him how do you take cover behind a Helicopter...

Good evening Fellas Got some new gages for My Deuce project just the system gages not the spedo or tac got them from some one like c&c so yall know the type. Question is on my air pressure gage the stock gage is of the Mec type and the new one is elect I got a new 120 psi sending unit as...

What is the correct color for a Marine mule I was wanting to use marine lusterless Green with yellow lettering would that color combo be correct and while we are at it what is the correct color Yellow for the letters . Thanks Jerry

Here are a few more and I will post a final batch when she is all done The shot of the drivers side needs a little green in the middle ( Just ran out at that time) and there are a couple shots of the old girl in the desert

I think I am at 46 cans of the rapco No#30118 Field drab brown 8 or 10 cans of rapco No#34079 Forrest green and 5 cans of Rapco No# 24087 OD green for inside of engine comp, motor, inside of tool box, tranny, transfer and drive shafts. At about 6.00 a can it is not the cheapest route but...

Man wouldn't it be nice if we could just buy new tubs.

I dont know if this will help you but what I did was painted mine in the base color which was Field drab brown then I took pics of it with a digital camera then printed o couple 2 to 3 copies the used colored pencils and drew on diff cammo patterns until I found one I liked then just take that...

Thanks I have that Manual and i was going to paint it in the Merdoc pattern the 2 colors that I have now were the base for merdoc but I ended up liking the 2 color originaly my truck only had 3 color. which was very commonly done. Thanks Jerry

It really wasn't to hard just took time the radiator was pulled and boiled then the frame and top tank were painted rapco 24087 OD green ( rattle cans) while the rad was out I painted the fan Rustoleum gloss black then the whole engine was soaked in purple power degreaser and pressure washed a...

Sanded and needle scaled I wanted to sand blast I have the cabinet and a pot type ( what a mess that makes) But my goal was to show that you can get sorta decent results without hauling parts all over town or any real special EQ. As I honestly Feel life is to short for an ugly Deuce LOL. So...

Thanks for the Pos comments. One of my goals was everything gets painted nothing gets painted over. it is one of my peves to see chipping paint under fresh paint. So all the more or less all the flat areas were sanded with a random orbit sander starting with 100 or 80 grit ending with 220 grit...

Here are a couple more along the way pics I had to remake the winch top plate but the rest was un bolt clean paint get new bolts re install

I am sorry I threw the can away but I got it from Napa and it was an exact match to the original color They have it in the automotive paint section ( Rattle can)then the numbers came from Mr. Larson at Mv Stencils

Thats all I have as well Jut pull off as many parts as you can finnish in a weekend and do it like you eat an elephant one bite at a time. I had to time all mine with the rounds of the local meter maid as when I took off the tail lights and rear mud flaps she gave me a warning that it was now a...