Search results

And this is a major problem if you ever get your CUCV off the pavement and into some mud. The rear swings left/right from one rut to the other. I found a pair of wheels that look VERY similar to stock CUCV wheels, but they had a different offset and now it tracks straight in the mud and still...

The 6.2L gave up the farm and I got a screaming deal on a 6.5L w/ side mounted turbo. The old engine is out. New engine is mounted to the transmission and motor mounts. Flex plate is bolted up. I know there is a thread on all the "little" things like having to modify my rear battery tray...

It will work just fine with stock tires. We put 70lbs of air in them to make them stand taller. Towed 400miles like this...

It was nice meeting yall also. And the truck drove really well and gave us no issues at all. Now for some truck porn... (before we inflated the rubber...)

What would be a good modern oil to run in this genset? Also, what oil filter and air filter would work for this unit? If I recall, the lub order called for a straight 30w oil. Thanks in advance.

Congrats on your new baby...

Use the ST85 and never worry about it again...

O'Reily Part Number: 01-0136 1975 Caddy Commercial - 100amp alternator I've had pretty good luck with this and it has a lifetime warranty. This will work but the pulley is a tiny bit smaller than the stock one so you will adjust it out almost to the end of the stops. Other handy part...

When you say "rough idle", are you saying there is a vibration in the truck at idle? If so, check your motor mounts.

Rapco 686 Tan Thinned it a little bit and rolled it on with a 3 inch roller. 2 coats.

Nice Rig... What brand of lift did you use? And never being one to pass up a chance to post a pic... Welcome...

Smittybilt Seat Covers.

Are there other areas with trails that are accessible to the public without any problems?

Yesterday, me and a friend were riding around the Killeen area looking for a old trailer. We actually found one, but that's another story. While riding around, we ended up on the south side of the Fort Hood reservation. The area is not fenced or posted. The area looks to be used like BLM...

Got a civvy console off of craigslist and just mounted all my gear to it. No holes cut in the truck. For a antenna, I used a BNC to FM adapter and hook it up to the long ass green .mil antenna that was on the truck.

You can not receive PM's, so here is my answer... From top to bottom: 3 port 12vdc power port Sony AM/FM/CD 800mhz Scanner 40ch SSB CB Sirius Sat Receiver There is one pair of speakers installed in the console but I have added a pair in the rear on the wheel humps. When I get my HAM Ticket...

I did the same thing but mounted all my electronic stuff to the console so I would not have to cut the dash up.

I'm going to add 2 of these to the dash where existing screw holes are located. They work well offshore, so they should hold up fine in the truck and they fold up when not in use. West Marine: Mugger Folding Drink Holder, Assorted Colors Product Display

I have it on my calender...

What squadron were you in? I use to work on UH-1N's in the Navy...