Search results

It should just ease in..Sometimes you will feel a slight clunk..

Yes it should have what is called a "Gov-Lok" which is supposed to make both wheels pull like a locker but they don't work very good..Most of the time you have to spin one wheel pretty quick before the other wheel lock in and starts pulling..

Yea they come with something like 308 of 355 gears I thought..456 gears would slow it down a bunch but it would pull a house down if you could get traction..

Cummins = Big $$$$ and you would have to use a beefier trans and probably a NP205 transfer case.Oh and a computer...I don't know if it would fit between the firewall and the radiator but I have never measured one..I know the Dodge trucks with the cummins pull great though..They used to be hard...

I put a 350 4brl in my 1008 with headers and 2.5" exhaust and flowmaster mufflers..I did change my torque converter to one out of a gas engine..Everything else is what came in the truck stock..Oh,If you use headers you need to use shorty headers..I didn't and my header are really close to my...

Cool,Mine must be Airforce..Thanks again

Here is a pic of the sheet in the glovebox..It said something about Air Force. The truck is at a buddys house rite now about 33mi away but I can run over there and get anything you may need..

If I can I would like to try my M1008.. Ser #1GCGD34JXGF306945 I don't have any bumper numbers so I can't be of much help..All I can tell ya is I bought it in columbus Ohio...Thanks

That pic isn't the style light on the CUCV..The one on the CUCV is just 2 piece and all plastic..I found a pic in the Unit Maintenance manual in the lighting section..It does show a plug but I'm not sure what type plug it is..

If you are talking about the blackout driving light in the grill I think it is hardwired in..No plug..Now if you are talking about the blackout lights in the bumper thats a different story..The front and rear have different plugs since the rear has marker lights and brake light in them..Which...

My 1008 has one in the glove box..here is a link to a pic of it..Click on the link and again on the pic for the largest view..Mine said something about an Air Force Vehicle Ident on it.

All the blackout marker lights work and so does the blackout brake lights..The blackout headlight just won't stay on when I flip the left switch up and let it return back to center the headlight stays on for about half a second and then I here a click from under the dash and the headlight goes...

Well I didn't do anything to it and all of a sudden now the right turn signal started working...That is the good news.Now for the bad news..Neither of the brake lights work now..I have a electric trailer brake controller in it and the light on the controller comes on when I hit the brakes which...

It's not the old 3 lever light switch,I figured it was a relay but I just havent found it yet..

Ok,My Blackout (Headlight) was not working so I removed the cover and it was rusty in there so I replaced the light socket and made it get a good ground..It lights up as long as I have the right switch in the down position and I hold the left switch in the up position..If I turn loos of the left...

Man I hope that it is just a flasher..I'll check..I probed the yellow wire all the way from the rear light up to the firewall where the wires come thru and no juice yet..I'll check under the dash next..Thanks

I will switch it out if it warms up a little..I'll let ya know if it works..Thanks

I just changed the right front socket and now the front turn signal and the marker light is working fine..The turn signal indicator light in the dash does not come on everytime I turn on the headlights either..So it fixed 2 of my problems..The right rear brake light and the turn signal still...

Ok,I got everything finished on my 1008 but the right brake light and right rear turn signal won't work.The front turn signal works fine though as long as I don't have the head lights on..I probed the wire to the rear turn signal/brake light and it's not getting any power when the signal or...

I found the rear blackout lights and Bridge plate ,Pintel Hitch and backing plate,Top rifle mounts (2) of them,..I shouldn't need anything now but If I need anything else I'll let ya know.