Search results

I cannot swear that this will fix your leak but it worked for me so I wanted to share. Please don't bomb me for the lack of pics LOL. My computer gets all tied up when I try and upload them so I just chose not to even try this time. My transfer case was leaking around the output shaft and...

Does anyone have any information on the shackle flip from DIY4X verses the offroad design one. The are pretty close in price. I am just wondering if anyone has seen both in person and would rate one over the other as better built. I am also about the have both u joints in my rear driveshaft...

Today I removed my breather housing and ran some new vacuum lines. Behind the breather housing I found a red or pink wire that comes out of the large wire loom from both directions. The wire goes into a black plastic connector. This is the strange part, the black plastic connector has a bare...

After reading many threads on SS I decided to change from drum to disc in the rear of my 84 M1008. I bought the brackets from DIY4X.com and picked up the rotors and calipers from NAPA. The NAPA stuff was bought for a 1984 K20 front axle. I thought I was good until today when I was installing...

I have done a lot of searching on this subject and so far have discovered that several members have removed their brake proportioning valve. My question and what I can not find the answer to is what they replaced them with. I live 80 miles from my dads shop where my M1008 is currently at...

I am looking to upgrade my leaf springs on my M1008. I am torn between 4 and 6 inches of lift. I would like to be able to run 37 inch tires. I am considering a ORD shackle flip for the rear. I would like to know what make of springs you have, how well they have held up (spring sag) and how...

After searching with no luck I have what I beleive is a pretty simple question. I have a 1984 Chevy K30 CUCV with a Dana 60 front end. It is leaking around the axle tube ends. I am not loosing a bunch of fluid but I currently have the hubs and spindals off the truck to repack the wheel...

I have a 1984 M1008. I has been parked for 1 year and I got it running this weekend. I had to replaced the glow plug solenoid with an old one taken from a junk truck because it would not activate. The problem is that the glow plug solenoid is making a chattering sound when I turn the key on. My...