• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. Mass Ownage

    Injector line leak

    I've got a leak where the #4 line screw into the HH. I've checked the head for cracks and none. It slowly seeps out from the threads of the line. I've replaced the line and that slowed it down but it will not seal completely. I tried rotating the line a little, and that didn't work. Any ideas...
  2. Mass Ownage

    Manifold heater

    I've search for this because I know I've seen an article mention it, but wasn't able to find it agains. The back of the igniter leaks fuel on to my turbo, ice taken it apart before and changed the o-ring and that seemed to work for a couple of years. What's the best way to bypass this thing? Can...
  3. Mass Ownage

    Injector pump leak.

    My pump is leaking out of the top where two of my injector lines connect to the pump. First I though it was old lines so I replaced them all with a new set. Still leaking from the same two lines. One did get better but still seeps above idle. Is there an easy fix or am I basically stuck changing...
  4. Mass Ownage

    Drive Shaft

    Anyone know where I can get a drive shaft for a Bobbed Deuce. Needs to measure 55" did a search and turned up nothing, but the search on my phone isn't always great....
  5. Mass Ownage

    Fuel pump problem

    I start my deuce about once a week because I can't drive it with no rear axles under it. But lately I have to give the fuel pump in the tank a little love tap with a hammer to get it to kick on. Is this because of the current lack of use or do I need to look at replacing it? Nothing urgent...
  6. Mass Ownage

    Axle alignment

    I did a couple searches and wasn't able to find anything on this. I am Bobbing my truck. I have the springs mounted and just got my u-bolts so i can mount the axle. Looking at the axle housing, I don't see where the alignment pins will be of much use when using the M105 springs. This is just at...
  7. Mass Ownage

    Leaking Turbo

    My turbo is leaking oil, especially if I run it hard. I've done some searching and haven't been able to find any seal kits or anything. Any have any ideas where I could start?
  8. Mass Ownage

    Ever hit a Sub-Compact?

    OK, so today was just getting on the ON Ramp for the interstate, I was on the throttle pretty good, my pump is turned up so I was dumping smoke, and an R-Tard in a MiniCooper runs the yeild sign and pulls out in front of me and stops. ALL 10 tires lock up. And as I lay on the horn, this guy...
  9. Mass Ownage

    Radiator

    Ok so after several monthes of dealing with a leaky radiator, i'm going to replace it. Anyone know a good source for one? I'm in southern Louisiana.
  10. Mass Ownage

    Transmission trouble

    Let me start by saying I know next to nothing about transmissions. I have a god awful grindy/knocking noise coming from my tranny. It only does it in fifth gear. You can feel it in the shifter. Any ideas, where should a start? It has fluid, I checked it today.
  11. Mass Ownage

    Need a Radiator BAD!!!

    Hey guys. Just joined Steel Soldiers, and I must say this site is AMAZING! I just drove my Deuce to a car show and found out my radiator has a serious leak. It looks considerably old. As I more less use my Deuce as a daily driver I need a radiator fairly quickly and at an affordable price. Any...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks