Search results

Well I did it again. I bought another generator. This one runs good and puts out power. The hertz gauge works but the voltmeter doesnt. I have power at the 110 outlet and 120 & 240 at the lugs. Has anybody run into this before ? As usual all help is greatly appreciated.

Does anybody have any injector gaskets or know where to get them ? I need enough for both injectors. Thanks in advance Racky

Ok I finally got to work on my 2nd generator. I found a stuck IP plunger and a broken plunger guide. I was able to get plunger free and replace guide installed new o rings.I installed IP and got the generator running It first was surging and making lots of blue smoke. The surging stopped and...

Thanks for the the help I got it running. I found a sticky plunger I was able to work it back and forth with some LPS1 put it back together and it started right up. Now It runs good but its not making power according to the panel gauges. I shut it right down and wanted to come here for some...

Hi everybody I just won 2 MEP-002a gensets that are NOS and were in long term storage. I finally got to work on one of them yesterday. Removed tape and plastic bags filled with oil and diesel installed batterys and low and behold no start. It turns over fine. I have oil pressure while cranking...

Ok guys I have a question. I was wondering why a mep002a would have jp8 only stenciled on the fuel tank ? I thought diesel and jp8 were almost the same thing. Any help on this would be greatly appreciated. Thanks Racky

Took a load of scrap in today. I was being lazy and didnt chain the gate level well guess what I bent up my tailgate very badly. I now need one. I have a M35A2C. If anybody has one or knows of one that would be very appreciated. Happy New Year Racky

Hi All I have a vibration in the drive line with what sounds like extreme gear whine I cannot figure it out. It comes and goes but most prevalent @ 45 mph. When it gets louder you can feel it in the steering wheel and when it gets quieter you can feel it in the transfer case...

Hi all I want to run some 12v stuff on my truck. I will mount the additional single wire 100 amp alternator above the stock one. Instead of mounting a additional battery I was going to connect the additional alt and power point to the stock battery at the 12v point. My question is has...

Hi All Does anybody know where to get or have a extra one they would be willing to part with the rubber mount with studs on both ends that mounts the headlight bucket to the fender? Thanks Racky

Does any body know what the 24v alternator shaft size is on a deuce ? I want to change up to a 3 or 4 groove for it. Thanks in advance Racky

Since I have gotten my M35A2C and been working out a couple bugs with the help of all of you I just wanted to say. THANK YOU ! Racky

Hi All and happy new year. I took the #s off the belts on my deuce and went to Bep Poys. Well the counter person was you know, well do I need to say anymore. The dayco # is 43-9018. Does anybody know the new dayco # Thanks in advance Racky:?:

Merry Christmas all. I cant seem to find the removal and install instructions for my injector pump on my deuce any help is greatly appreciated. Thanks Racky

Hi guys. I need some help. On my way to work on Monday my truck drove approx 1 mile than started to loose power than acted as if I pulled the shut down handle and died. I shot some either to it and it started and ran than died. Electric fuel pump in tank is working I have fuel coming out of...

Ok guys I just got my title from Government Liquidation for my 1975 M35a2c.Now the hard part. I live In NJ HA HA HA I know but that is another subject for another time.I tried Haggerty Ins They turned me down because I told them I wanted to haul firewood maybe twice a year for personal use.I...

Hi guys I need info on how to adjust my cluth in my m35a2c.Any help is greatly appreciated. Thanks Racky