• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. D

    GM Spin On Fuel Filter Conversion

    Went to do a spin on fuel filter conversion on one of my M1008 CUCV’s. Everything we found online seemed to be chopped up & incomplete in regards to a parts list and how to. So I’m going to give you a start to finish picture scenario along with a complete parts list. 1st picture - on the left...
  2. D

    1986 M1008 block heater question

    I have a 1986 M1008. It has a permanent battery tinder, oil pan heater & factory coolant heater. Thought we had unplugged the oil pan & coolant heaters & plugged in the battery tinder yesterday but when I went out to the truck today I realized the coolant heater was still plugged in. Checked the...
  3. D

    Volt Meter

    On my M1008, does the volt meter read only the 24 volt system or does it read the 12 and 24 volt.
  4. D

    M1008 Muffler

    Does anyone have the original GM part # for the CUCV M1008 mufflers? Or does anyone know where you can get the original mufflers? Thank you
  5. D

    Horn Issue

    Have an 86 M1008 that every now and then when I turn the steering wheel to turn a corner the horn goes off. Sometimes it stays on & you have to hit the steering column right where the steering wheel and column connect in order to shut it off. It will go months on end with no issue and then all...
  6. D

    Removing U joints on M1008

    Removed the rear drive shaft off my M1008 and had some issues with getting the u joints removed. Had a hard time finding info and the info that I did find suggested that I heat them up. Tried that and still didn't work and I remembered that I had the Unit Maintenance manual (TM9-2320-289-20)...
  7. D

    Problems with belts

    I replaced all my belts on my M1008 and they were all nice and tight. After 500 miles or so when you turn the steering wheel you can hear some squealing. I checked the belts again & marked the alternator and power steering pump and they weren't loose. I don't want to overtighten the belts and...
  8. D

    Gen 1 Belt Fell Off

    So my Gen1 belt fell off a couple of hours from home. Of course it's dark and raining and I really don't have the tools with me to replace it right now. I went and picked up the belt but will I make it home. My gen 2 belt is just fine but not sure if just the gen 2 will keep my batteries charged...
  9. D

    M1008 Steering Issues

    Have a 1986 M1008 with 45,000 original miles on it. We got it when it had 5,000 miles on it from Boyce Equipment out of Ogden, UT and were the first person to title it. Runs like a top and is in mint shape. About a year ago when you would turn the corner, you would keep turning and turning the...
  10. D

    Engine coolant temp light and Dual Alternator questions

    Is the engine coolant temp light supposed to light up when you turn the key on a M1008? I'm not referring to the low coolant light because the manual does state that that light should come on (which mine does) but the manual doesn't refer to the engine coolant temp light. Mine doesn't light up...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks