Search results

I am off to work on my 003. Will that oil pan support the genny with jack under it,,or will it bust? Is there an easy trick to replacing the isolators on the feet? Looks like unbolt and rebolt, but gotta support the genny and motor so i dont cut my hands off.

While trying to be an electrician,,,i noticed all 4 of my mounts with the rubber on each side are junk. The gen and motor have dropped about 2 inches thru the mounts as the rubber is not connected any more. Can these be had?

Sometimes when i start my 003a, the batt guage does not move, so i shut it back off and restart. That usually fixes it and it shows the batteries charging. Now today, no matter how many times i restart, the guage stays all the way to left,,,dead. I am off to try toubleshooting with the...

Where do you guys find od green and tan paint? I looked in wally world, tractor supply, lowes, and a bunch of other stores around here,,,but no luck. I am semi colorblind, which does not help, but it makes my wife laugh at my cloths sometimes,,,,,

My book references replacing the fuse in different places, but never tells what amp the fuse is. Anybody know?

I disconnect my battery cable when the 003 is just sitting around. I notice tiny sparks when connecting or disconnecting. The switch is set to "off". Is this normal? Would batteries go dead if i leave them hooked up? What would be pulling juice?

Gettin colder. I bought glow plugs and started to take old ones out. It sucks so far. Should i get the generator hot first before taking them out? Should i use never seize when i put new pnes in? know what thread they are? I need to run a tap in the hole of the one i got out.

I have a dirty one. How do you clean them? Can i put a power washer to it?

Is it ok to put a ground lug up in the box with L1, L2, L0 ? It sure would be easier to hook up a gen cord.

Ok, i know we are supposed to run 60 hz,,,but what is the tolerance? How picky am i supposed to be while using it? 58-62? 59-61? 59.5-60.5? Now on the voltage, i hear circuits are 110, 115, and 120 volts. Over the years it seems to change and i still hear different numbers from people. Where...

I got an 003a the other day. When running the hz meter goes to 65, or pegs to the right. The voltage is ok by my voltmeter, and the meter on the unit. How do I determine if the hz gauge is bad, or if it is running incorrect hz?

Well, i broke the cap on the starter solenoid. Too much strength on the socket tightening the batt cable. I dont find any on ebay, is there a standard onan one available without buying military replacement? It is type 1 shown in the manual.

I want to remove the flywheel om my 002A to clean the stator,,hoping to improve my charging rate. What are the 6 bolts for? Do i remove them, or just the center bolt to get the flywheel off? edit: found it in manual thanks to GMG. Can't figure out how to delete thread

Mep-200a,,,,should they keep running after you remove a battery cable?