Search results

Found this 24 to 12 volt phone charger accessory box with the converter built into it. I ordered one figured I would post a link http://www.kencofire.com/ab224vodcto11.html

happened apon this m1088 I believe with trailer in augusta ga. I was wondering if it belongs to someone here

Ok I know some here use behr paint to paint their mv with good success has anyone here used behr deck over on their truck as a bed or floor pan liner? if so how did it hold up? I was thinking about doing monstaliner or other liner on the interior of my hmmwv but the deck over seems like it would...

Came across 2 humvee training repair videos on youtube full of useful info. figured i would post em. https://www.youtube.com/watch?v=hBA0QRg0a8g&t=170s https://www.youtube.com/watch?v=c0IpRn3m3bs

Well I guess my starter box committed suicide. It started fine this morning, when i went to start it again later the light blinked out real quick and doesent energize the plugs and it stays slow blinking while the truck is running. yes I have a ground harness and this is the original box. Guess...

So I was replacing my glow plugs got 7 of em out no problem except the one on cylinder 8 twisted off, the top of the plugs turns and seems attached to the rest of the plug by whatever is inside it. Anyone have a trick to get it out with out taking the head off? if I have to take the engine apart...

I just got this hmmwv tachometer box or so i think. Does anyone have some pics of where exactly it goes?

So my rear drive shaft rattles quit loudly only when idling everything seems tight no play in the u joints and drives fine no rattle. It goes away if I push up on the drive shaft a bit. I always thought it was my exhaust pipe rattling so I ignored it till the other day when I decided to fix it...

So I bought a 4 man divider for my humvee how exactly is it supposed to mount in? I was thinking about fabbing a bracket unless there are readily available brackets which there dont seem to be. and does anyone have some good pics of it installed?

I have 4 half doors on the way and was thinking about building a soft removable window out of soft doors like the h1 in the picture has anyone here done this? also to attempt this I need 4 soft doors in horrible beat up condition with good windows I can restitch them if torn new ones are rather...

My rig has a T/C light does this mean it has a 218 or 242 case or either?

So I never really paid attention to the extra screws and the 4 holes in the drivers foot well area and passenger side too and learned it its for supplemental "armor". does this mean at some point my truck was a M1025 or M10xx type truck? or did some m998s come that way?

Does anyone know what this MWO is? I cant seem to find any info on it.

This dome light came with the truck attached to the B Pillar. I have been trying to figure out where it plugs into but cant find anywhere. Anyone know where it is supposed to plug in or am I going to have to make a plug in?

Today I noticed my trucks exhaust pipe where it connects to the drivers side manifold has completely separated from the flange due to rust or maybe gremlins and is leaking major exhaust the other side is fine. Will this cause any performance issues or running issues if I continue to drive it...

Ok so my hmmwv wait to start light flickers faintly and erratically after starting if I move the shifter out of neutral it will not flicker it also flickers if I jiggle the shifter weather started or not. I un plugged the neutral safety switch and park brake switch and it still flickers if the...

While driving one of my hmmwvs it started to kind of hesitate at around 40mph it acted like it had died but was still running and lost all power.while slowing down the engine would surge a little jerking the vehicle losing power and regaining it. Only does this when the engine is hot I got home...

so my head lights don't work and the passenger front side blinker light only works when I put on the turn signal. Tail lights, turn signals, 4 way, blackout lights all work. bulbs are good and I put in a new switch still the same problem. I get 2 volts at the headlights and inspected the wiring...

Hi new member and hmmwv owner here. when I drive the truck it shakes quite bad like I am going over rough bumps it mainly does it when accelerating and slowing down. all the tires are good and appear straight no strange noises from the drive train either any ideas?