Well, I finally got the spare tire mounted on and the CTIS stuff hooked up. I used the truck's crane to lift it in place. For some reason the stops are taken out of the turn table and the boom can swing 360 deg around. I like that. You just need to be a little more careful swinging by the cab. I am not sure if the CTIS is working yet but will tinker with that later. I removed the hard top and replaced it with a new soft top as well. Makes a big difference. I just need to reinstall the data plates for the rear winch controls and add the side view mirrors. A little paint touch up needs to be done as well on the front bumper and rims need to be painted black. The next task will be detailing the engine compartment as well as the interior of the cab (not that it really requires it).
I also replaced the tail lights with the aluminum ones that have the bottom LEDS in them and I replaced all of the reflectors. For the most part it is done but like will everyones truck, you never stop working on them or making that one part just a little better or newer. Here are some pics of course.
BTW, I plan on now jumping on the other truck to sell it and will continue this thread on that truck. However, if someone just has to have the truck I just finished, PM me.