Recent content by AN/ARC186

What about a stem mounted map light?

I did something very similar to this 5 years ago but used a metal watertight box I had laying around. I put a desiccant pack in before I closed it up and haven't had a moisture issue ever.

Another good source of LED's http://www.ledtronics.com/

Here you go. http://www.ekmmetering.com/ekm-metering-products/complete-metering-packages/120-240v-package.html?gclid=CNPD_KLBvcYCFQiTaQod_7kPow

Hope we hear something soon.

It's a Decepticon!!!

Try this, I've used it before and it's worked well, plus it's a closed cell foam. http://www.rhhfoamsystems.com/standard.php

Wish I could have made it there for the whole weekend, as it was , Sat and Sun were a blast! Thanks once again to Aaron and Amber for hosting us, as always it was a great time!

I picked one of these up to handle intercom and radio chores.http://www.ps-engineering.com/pma5000ex.shtml while a bit spendy it give me the ability to connect multiple radios for receive/transmit through the headsets as well as integral stereo intercom and cell phone interface, plus I can...

If you can get it to my place I'll see what I can do.

I'm doing another one right now so I'll take pictures. will post once I've finished.

For antennas I use the following: AS-3900/VRC base Whip A3018230-1 I disassembled the base, removed all internal components except the base BNC connector. I ran coax from the BNC connector up to the spring base connection point, connecting the inner conductor of the coax to the center pin of...

Yep, I'll be there!

Nice!!