• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by bigjuice69

  1. B

    Black Fuel in filter

    i agree it's algae, my buddy got some bad fuel with it in for his semi he went thur over a dozen fuel filters before his truck ran good agian.
  2. B

    M1008 Frontend starting to sag

    i agree with (toocool) that is what i did and it works great
  3. B

    1400x20's on Marsh 1 piece rims

    are these wheels from marsh racing if so aren't they offroad only?
  4. B

    What tires are these??

    the bridge truck with 14X20 duals is 9 foot 6 inches wide outside to outside. the axle housings on these trucks are wider than the standard 5 ton.
  5. B

    axle hub flip or swap?

    on my M945A1 bridge truck it wouldnt work because of the air brakes. I used the spacer and studs from the front axle so i could use hemmet wheels so they looked the same as front
  6. B

    Devils Lake...

    Bighurt you can park them at my place i got room your new trucks could keep mine company!!! I live only 40 miles sw of Devils Lake.
  7. B

    single wheel conversion on M945

    Hi bullcatcher i am having the same problem what did you end up doing to make it work?
  8. B

    anybody flip rear hubs on M925

    hub to hub is 78 inches and mount the wheels flipped with 16's should add at least 12 to 13 inches to each side making the truck too wide!!! the bridge truck axles are at 8 to 10 inches wider than other 5 ton trucks. end of axle shaft to end of axle shaft is 95 inches
  9. B

    anybody flip rear hubs on M925

    i like the look when done with hemmet rims if i measured right the front and rear should be the same when flipped
  10. B

    anybody flip rear hubs on M925

    i got the back tires off and the rear hub setup looks different from a 900 truck to a 800 truck and was wondering if anybody has flipped the hubs on the 945 bridge truck any help would be great. thanks
  11. B

    "stock" bobber

    there's a couple of pics at www.idahomotorpool.com of what you are looking for.
  12. B

    Where to mount Hydraulic Winch on an M818?

    that winch came off the a-frame hoist on the back of a 800 series bridge truck. I got 2 of them left for sale.
  13. B

    454 will replace multi fuel in m35a2?

    on our C70 truck has a 427 with air compressor for air brakes, i was thinking the same using 377 stoker motor and turbo 400 in a 5 ton.
  14. B

    6.5 turbo vs ats vs banks kit is one better

    if i remember right the 6.5 ex-manifolds dont fit from the 88-98 body style pickups to the 81-87 pickups frame clearence problems
  15. B

    2 bridge trucks in scrap iron yard

    on the M800 and M900 bridge trucks i have the pto's run off of the trany
See more
108,364members
163,673threads
2,302,893posts
926online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks