Recent content by hank2424

I as well am too far away, But prayers to family for the healing process. All members here are so great, they take the time for funerals, help recover vehicles, and offer advise, awesome support. all of us are a tight family, can't ask for anything better.

see Hanks thread on 12 volt alternator install

I installed the same heater and mine only gets warm and not hot, seems like it now leaks a bit from thermostat housing. Could it be touching the block maybe?

what about adding a small magnet inside the pipe? pressure would keep it open but off it should stay closed.

thank you.

Well guys, here are pictures of my 12 volt alternator install on my m923. I nstalled a 1000 watt power inverter and a small 12 volt lawn mower battery, the alternator i bought from autozone part #7127 63 amp clockwise rotatation for $39.00, that also included the core fee. I then used a mr...

1984 m923

still has oil in it, oil looks clean and not burnt. checked in neutral and fluid is reading full. when I put it in 1-5 it seems to shift ok but a little fast, then I have to down shift manually to get it in the sweet spot and not lug the engine.

Ok here we go, when i put trannyin 1-2, it will shift 1st, 2nd and then shift 2 more times before i manually go to 1-3 and so on, with same shifting issues. Is this normal or does tranny need adjusted? Please help!!

I used flat black, flat brown, and a satin for colors. they are all oil based paints, reduced 4 to1 with mineral spirits and sprayed with a cheap harbor freight spray gun. the seats are done with a product called deck over from home depot, it like a poly coat based paint, I thinned with warm...

Ok guys, have truck done finally. Hope you like it, added a little of usmc.ooorah

i was able to drill ball out on throttle shaft, turned screw out two turns and unscrewed the aneroid valve three turns. Throttle response is much better, and finally a grey haze of smoke.

now that is done trying to power up but I think I have a bad fuse part # JTL 56A , also may need some capacitors part #AM-427/u, and a part# TF-204/U, AND PART# O-325/U. maybe some one has these,also looking for the antenna # AT-271. I have a GC-0842 antenna if someone needs it. Thanks Hank

how hard is it to drill out screw in throttle shaft, and are all pt pumps the same in having the ball in shaft and adjustment screw.

Trying to find what mount is needed for 5 ton antenna , also looking for a am-598/u amplifier, also a mount# mt-759, cable# cx-2031/u. I have found the info to make my own battery pack getting items from radio shack. these items are for a 175a/prc-9 radio. Also does anyone know can you hook up...