Recent content by harry

cut down cargo caver and bows to fit trailer

thanks dint want to be pressing in wrong direction

I been reading past posts and TM ,cant seem to find anser when pressing in or out torque rod ends , dose it make a difference witch side pressed from ( any lip on torque rod ) Thanks Harry

I have # 12490155 dont remember brand Harry

plywood went inside helped strenghten roof and gave me something to screw manhole ring too, got rid of bolts and used #14 stainless panhead screws added extras betwen were bolts were , painted top then bedliner . installed digital cammo headliner I post pic on truck after next week

used Hurkuliner think it spelled something like that .Its what fleetfarm had .used 1/2 qt used 4" roller , did mostly for non slipping and helps hide uneaven sheet metal

I should have taken some before pics was caved in about 3" water pooled on top. took out all inside (supports most were cut for man hole ), grined off what was left , fliped over and worked out, fiberglassed a sheet of cabnet 3/4 ply wood should be able to stand on top with out caving in...

try Erik's Military and Industrial Surplus - Military Vehicle Parts, Industrial and Military Surplus Electronics I know he has air dryer filters and some CTIS wheel parts Harry

I would power wash and respray otherwise its scrap and chisle the old stuff off Harry

I bought 5 gal green 2 primer 3/4 gal black / way too much 1 gal primer 1 -2 green 1/2 black I think should do it

Im not sure what they call these boxes but sure make a great sauna when weather warms up will camo outside

scraped wirewheel and sanded ever thing ,feathered and smothed old paint ,dint try and remove good old paint wipe down with solvent , primed bare metal heavy, and paint primed lightly ,mix paint well and realy mix primer well use mask good one ,cover all your skin you can, and eyes ,you...

if your going to repaint the wood try this paint for a base coat you dont need primer and is some tougf paint you will need to pain over it when it drys for couple weeks its about 20 buck qt I used on other truck after sanding of old paint . (Benjamin More Iron Clad Alkyd low luster Metal &...

type 1 mosture cure no hardener use the two part primer, made to work together. seems like stickey hard paint my shoes picked up some on grage floor ( painted some parts inside) took over week to wear off bottom of tennis shoes (shoes picked up over spray on floor)

Sherman Willans CARAC paint and ordanace wash primer