Recent content by MO MV man

If memory serves me right, the TM's say 10PSI or higher is okeedokee. The 8.3's aren't much on idle oil pressure. And you are not the first person to ask this question.

Definitely got my attention! Thanks for the thread!

I love this project! Great job!

I've been toying with this idea since getting my truck. Thanks, Ken!

My speedo did the same thing. Assuming you have an M900 series truck, Memphis Equipment has them. If memory serves me right, it was just under $100 shipped. That is, by FAR, the longest speedo cable on the planet. LOL I haven't installed mine yet......definitely not a quick job. In the...

A CUCV has a totally different exhaust system than a gas powered K30? I put a Dynomax cat back on my dad's old '88 C10 and it fit perfect. Came with a piece of pipe to fit long wheelbase trucks, too. I placed my first order with Rock about two months ago. Online said right part...

FINE job, Jeep Nasty! Glad to see your crew cab is coming together.

Welcome from Missouri! That's a sharp looking Deuce! Congrats!

My historic license plates FINALLY arrived and I can finally legally drive it!! :) I also changed out a CTIS wheel valve.

The 8.3/A2 trucks are a booger to prime. Mine was a living **** after changing the engine and frame filter. You don't have a frame-mounted filter? After thoroughly beating my head against the wall, what seemed like 100's of pumps, using some ether and getting what appeared to be steady...

Update..... I checked the tire pressures this morning and ALL were within 1.5psi of each other. SUCCESS! I contacted the vendor and they were VERY interested in my findings. So I forwarded the pictures of what I found along with the steps I took to rectify the situation. In no time, they...

CORRECTION: Erik's is $16.75 per kit plus shipping. The kits do NOT include a replacement valve seat. So if your seat is corroded to bits (like my NEW one), you'll have to find another seat somewhere.

The kits are really cheap. Erik's lists them for $14 plus shipping, for example. But he and many other vendors don't carry the complete valves. I shopped around a LOT and saw some on Ebay but wasn't comfortable with an unfamiliar vendor. So I went with one I was very comfortable with...

My wheel valve adventure...... Hopefully this will save someone some headaches: http://www.steelsoldiers.com/showthread.php?124972-CTIS-wheel-valve-adventure&p=1555681#post1555681

Hello all, I've been flat ecstatic that my CTIS has behaved perfectly since I got the truck from GL until the other day when the galled threads of a past "repair" (in military hands) on the big brass nut allowed the valve to pop loose and I ended up with a "Run Flat" light and LOADS of...