Search results

There are more than 2 different types - at least 3 that i know of for 73 thru 87 chevy trucks

we all know that - he is asking about a 1028 and a 1028a1

Maybe some are rated as cab n chassis - no bed - 9400 - when purchased and with 9200 when they came with a bed ? Or maybe one has bucket seats - 2 - passenger and the other has a bench seat - 3 - passenger ????? That is a great question

The 700r4 /6.2 combo was available for 6 or 7 years. Also they put the 700r4 in many 3/4 ton trucks - 84 thru 87 light 3/4 ton models had a 700r4 - the heavy duty 3/4 ton models had a turbo 400 and ran on regular gas thru 86

Same as civilian model k30 35 spline inners and 30 spline outers

Th475 is very noisey.

Th 475 has straight cut gears and a regular th400 has helicar cut gears. The th475 is much stronger with these gears however you cannot downshift . We use kevlar bands in my sled pulling truck -

More bands ? Lol

Been mud boggin and truck pullin all my life i have had/seen water in hubs alot but i donot see mud going past a good tight o ring seal. Most of the 4x4 engagement issuses i have seen - in older 4x4 's - is a hub will not engage - 9 times out of 10 is is because the person who installed...

How does mud get inside a properly installed hub ? I guess warn , ford , chevy , dodge and most hub maufacturers should consult you and change their service specs on hubs and hub installation.

Put bearing grease on them and they will probaly never work poperly again. Use the white spray lube or white lithium grease from gm

Same manifolds and exhaust

They look really good - great idea restoring and selling - i wish there were more/other companies like yours that sell these to the public - sounds like somebody on here is jealous - cheap price is not always the best value - good product and customer service = success - keep up the...

I used a engine harness out of a 1986 suburban gas motor for my swap . Every thing just plugs in.

Both the np 208 and np 205 t case are plenty strong enough. Getting the correct adapter for your tranny might be a little bit of a challenge. I just completed putting a 454 in mine. Your stock radiator should be plenty big

Torque monster:-d

366 IS A great medium duty truck engine. Used in the 1970's and 1980's. I wish i had one with a allison auto behind it. Easy swap - same/similar as any other chevy gasser.

Very nice job looks excellent

You can still buy most of the body repair panels and rust replacement rocker panels , floor boards etc from your local gmc or chevy dealer. Cannot beat oem parts for fit - i just bought complete rocker panels for my 1980 k30 from gmc dealer for $115 per side - no china junk - the real deal

3.42 will be just fine - take a m1009 for a drive - they have 3.08 - this will give you somewhat of an idea of performance/economy change from 4.56