• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Andrmorr

    Denton NC mv show 2015

    Ahab, are you going to Denton now?
  2. Andrmorr

    2015 April 17-19th Denton NC Buy/Sell/Trade thread

    I can use the WMO...I can only take 1 dump bed full though...
  3. Andrmorr

    Allison M916 + Mk48 Cab = 6x6 "FEMTT"

    What if you built a stand for the tank with hyd cylinders at each corner that held it just high enough so you could back under it and lower it onto the truck...the tank could be kept full and ready and able to be loaded in as much time as you would need to back under it, drop the jacks, tighten...
  4. Andrmorr

    2015 April 17-19th Denton NC Buy/Sell/Trade thread

    Make sure you put a post in the parts wanted forum. Someone might have one for sale that's not coming to the Rallye, but is near someone who is coming and might help you get the trans. Several members are parting out trucks so it should be easy to find a trans...
  5. Andrmorr

    2015 April 17-19th Denton NC Buy/Sell/Trade thread

    BATTERY BOXES They will fit Deuces, 809 series and relocated M939 series with battery box under passenger door ONLY 2 LEFT $100 EACH AT DENTON NOS M939 Battery boxes for the side relocation kit...green...sealed in factory box... NSN- 6160-01-475-7743 P/N - 12368320-1
  6. Andrmorr

    2015 April 17-19th Denton NC Buy/Sell/Trade thread

    Wanted: 5 ton front bumper
  7. Andrmorr

    CTIS for back wheels--- HEMMT front wheels

    That would be fine too but if you put the CTIS on then you have to use the shield and offset weight... From what I can find out, the offset wheel weight and CTIS shield won't fit the HEMMT rim... Anyone got any knowledge of using the front CTIS on the HEMMT rims?
  8. Andrmorr

    CTIS for back wheels--- HEMMT front wheels

    Can it be done? I want to run HEMMT rims on the front but retain CTIS on the rear axles to help with traction situations...airing the front up/down would be easy with a gladhand hose since its only two tires and the nipples are on the outside... Can the CTIS be blocked to the front axle and...
  9. Andrmorr

    Was Stuck in M923A2, learned many lessons

    Don't be too hard on yourself...there were no zero's or extreme weather on your location...6 miles is not a big threat especially since help is only a cell signal away...add a zero or more and it is...I'd call it a "reminder situation" or Murphy warning!
  10. Andrmorr

    Was Stuck in M923A2, learned many lessons

    There is always lessons learned (good & bad)on these type trips...Any chance you tried it with the front wheels OUT of lock? If so, did the rears pull diferently? I had that happen in a M925 crossing a creek on a powerline road in FL one time...the water was only 6" deep but the front wheels...
  11. Andrmorr

    Air horns to replace stock ones

    I like the Kleinn 411 myself...It's made of copper...and it adds the base tone that's missing in the high pitch M939 horns... plus $87 shipped on Amazon is hard to beat.
  12. Andrmorr

    Denton NC mv show 2015

    Ahab, you can ride with me...I'm at the State Dept Mon-Thurs and stay close to the Iwo Jima Monument... then go home to NC leaving DC Thurs at noon, that get's me to Burlington at 5:30ish depending on traffic. Denton is only 30 miles further so I could drop you off...I'll be headed back to...
  13. Andrmorr

    Denton NC mv show 2015

    1 M930, 1 Driver & 1 Co-driver... I'm bringing some firewood to the Rallye for the firepits... Is there anything we can bring to help you out?
  14. Andrmorr

    First post, First truck, Lost puppy

    Sooo...Did you end up getting a truck? Don't pick our brains, peak our interest and then leave us hanging... Hopefully you got a M927A2 and turned it into a 2 place Afghanistan gun truck...How cool would that be sitting outside a gun shop...or 2 M-45 Quadmount air defense guns...man O man what a...
  15. Andrmorr

    939 series 14.00 x 20 air pressure

    Just curious if you were able to track down a definitive answer on this...
  16. Andrmorr

    Technically...it works! (dump bed)

    only 1 foolproof way...a winning lottery ticket! Alternate dumb luck way is if you accidentally slip on some grapes at Walmart...but that would probably hurt too much and slow down the MV work...
  17. Andrmorr

    Denton NC mv show 2015

    I just won seven 5 ton battery boxes in Groveport, OH...is anyone who is coming to the Denton Rallye nearby Groveport or already picking up from Groveport? I would make it worth your while to bring the boxes to Denton with you... Who else in SS is near Groveport that picks up items?
  18. Andrmorr

    What 5-ton series would be good for mudding?

    My vote is: 932A2---which gets you started with: lower purchase price of tractor Shortest wheelbase- 167" Dual fuel tanks 20k hyd winch up front pass side toolbox up high CTIS for tire press mgmt no bed- mount short bed of choice Then add: 16:00R20 XZL TIRES (53's) HMTT RIMS (more offset)...
  19. Andrmorr

    Calgary AB to vancouver island photos

    Makes you wonder why a newly rebuilt camo truck has a tan soft top... My truck was the same way... Sure was glad to get it swapped out for the proper camo... If your top is in good physical condition, you could just repaint to match... I've been impressed with how good Rapcoparts.com "383" CARC...
  20. Andrmorr

    Technically...it works! (dump bed)

    I want one of those grapples on my truck...besides being crazy useful it would guarantee no one parks near you at the mall!
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks