Search results

Nice catch !!!

I've gotta put mufflers on one of my cucv's and was wondering what you guys are running. Don't want any exaust noise but would like something free flowing as possible. Any suggestion's ?? Thanks, GB.

Thanks for the info. Johnny law will be happy now too.:beer:

Sorry to be bringing up an old topic, but after searching I'm still no closer to the answer. A while back there was someone on here who was selling an adapter for 1008's and 1009's to be able to use the military trailer connector in the bumper and a flat connnector on the trailer. Any help...

Thanks. I've got a new set of injectors for it that i haven't yet had time to swap. Could the"burnt valve" sound i here at idle be caused by an injector gone bad ? It has a dead-miss feel to it when it's first cranked up in the morning and still cold.

There's no blow- by at all coming from oil filler tube.

Hello. One of my 1008's has picked up a slight burnt valve sound out the drivers side pipe. It runs fine but it smokes out that same side when you start it. Doesn't smoke at all going down the road. The startup smoke could be valve guides and seals but whats the best way to check for a burnt...

You guys are prbly right. To upgrade the joints can put the weak link towards a more expencive part. But, I do want a greasable joint. Also, is there much truth to installing a "greasable" u-joint the wrong way. In other words install it so the hole for the zerk fitting is not spreading when...

I've got to replace the rear driveshaft u-joints in my 1008 and was looking for an upgrade for the u-joint. Also will be swapping from a strap to a u-bolt design yokes. If anyone has a part number or can steer me in the right direction for a stronger u-joint..... Thanks.

It did make the truck start and run better after I cleaned it. When it's clogged up does it cause pressure in the rubber return lines ?

Yesterday I took off and cleaned the fuel return check valve on one of my 1008's and it didn't have the glass bead at all. The check valve was a white plastic deal with an internal spring with rubber seals on both sides of the valve. My other 1008 has the valve with the glass bead. What gives ...

I've got my reciet somewhere, but it was less than than 400 bucks. I'll try and find it to be for sure. We had almost givin up because we had ordered 2 radiators prior to this one and they were both 3 rows and were sent back. This one has four rows and is the same as the original. I couldn't...

A friend of mine owns the CarQuest here and we found this for my 1008. It was an exact match for the one that was in it and was brand new. Hope this helps.

Ol' Santa came early here too. The tool box has gotta have a coat of something flat but otherwise works good. The CO2 tank is a 20lb from "The Source". MERRY X-MAS !!!

Does the gear vender use a slip yoke or is it a fixed yoke ?

Where can you buy Diesel Purge ?

Reguardless if you purchase or not, try and put us up some pics of it please :-D

Also, be careful not to bend the steel fuel lines.

Sounds sorta steep, but good luck. That Tommy lift would come in handy.

Well thanks Einstein. Try that search yourself and see that nothing comes up. Maybe a little conversation is needed here, hopefully someone with actual experiance with this particular product will chime in. :-D