Search results

sometimes the response is faster then the search!

Welcome to the sickness! as stated just look around and if pos. look at one before you bid on it. treat it like any other car or truck you want to buy but remember its a 25 year old truck even with low miles still 25 years old good ones are out there but so is junk if you will!

Sorry cucvnut much easer to pump grease gun a few times then unbolt drive shaft to grease the slip! I'm getting old LOL.[thumbzup] Take off once and drill and tap for grease Zerk and be done . put Zerk close to the joint end of the slip to stay away from splines

Sorry Yes keep it green if your going original military!

LOOKING GOOD!! :beer:

I like the mile maker premium hubs but there are many out there as cucvnut stated look for the better hubs will be happier , Also look for a full turn lockout the 1/4 turn will be harder to operate! full turn are mile maker premium part#104, warn premium part#20990 or super winch part# 400518...

Nice job! looks good! I like the lite guards! :beer:

After install start and check as stated the size of cooler will deturman how much you will need to add! :beer:

The rattle of the 6.2 is louder then the intake noise so I think a hood blanket or insulator would make a bigger diff in sound! [thumbzup]

I agree the boot is not needed! if you plan on mudding remove it! get into a habit to run grease Zerk's every oil change all will be good!

The Humvee uses the same engines available for the trucks for the year built.

Just trying to help. :beer: What kind of fuel mileage are you getting with the trans been thinking about the same swap! Was the trans you used from behind a diesel? If not change the Governor or the governor springs from a diesel trans and you will much happier with the shift points and down...

I agree! I also have used them. Just I am not comfortable running a spacer that wide with a wheel that is heavy on a front axle thats all I,m saying! The wheels do look great on the trucks [thumbzup]

You can use it without the brake switch. But even B&M recommends it. What the brake switch does is unlocks the converter the moment you touch brakes the unit will have a lag on unlock because it needs so sense the speed drop! :beer:

Wow after reading this I guess I got lucky :beer: I normally buy parts trucks just for axles and parts when I needed a wood truck I found and bid on my last truck a M1028. Add stated 15580 miles and parts missing on engine and no tailgate . that didn't bother me final bid and selling fee and...

Yes the dome is a satellite antenna either gps or tracker Had the same domes on wreckers so the home office could track the trucks! the pintle hitch on the front would be handy! a lot easier to back trailers. the spare well looks like its bolted to the top edge of gate not a good deal!

I always like the wheels but do not like the idea of the spacers you need for the single wheel Dana 60!

Yes it will fit. Yes there are defiances! Welcome to the site!:beer:

As stated :ditto: the fuel pump location has a block off plate remove it and install the fuel pump push rod and pump you will have to relocate the oil return. Or just install an electric pump and leave that part alone! The vacuum pump you remove the plug ( as you called it will actually be the...

First B&M makes two kits what kit do you have ? You will need the part# 70244 the other one will not work for your application. also you will need to find a AC Delco part # D862C brake light switch it will have the double switch you will need one set for brake lights normally open and the...