Search results

Fleg you are correct just checked the fram p3940a , wix 33136 and acdelco tp1006 and the micron rating for these filters are all 10 micron!

Nice score and a winch also! the pics do not show much in rust. Let us know how bad it really is. will make a nice truck ,I always thought a crew cab would be the best of both M1028/M1009 :beer:

Buy the brackets then get calipers and rotors and brake lines from your local parts outlet with or without parking breaks way cheaper! Do the hole thing for about 350.00. I myself remove the ball in the proportioning valve to the rear, equalizes the brakes front and rear! not only makes for...

The rest of the take apart will not be as bad, The first nut may be stubborn if the spindle threads are buggered up. But with the socket should not be a problem! The lock may need some persuasion but just pulls off. Then the retaining nut should come off and the rotor should fall off bye the...

I will almost bet you will be fine with your repair! with the sleeve and all seems like it will be fine. the great feeling is yet to come . That moment when it rumbles to life will be great! then the thought I did it! :beer:

In post #8 He stated in text lingo not proper English that he had to beat on it to get it out ! Should of pulled it out. But sounds as if he really over revved it. To answer the question the 6.2 will be the easy est swap, Bolt in no changes! The 6.5 same bolt in but you have to do other things...

Was driving , stopped and got out ! :confused: My question is what did you do to tick her off ?

Nice looking truck!

If you didn't get top plates ASK and you will receive check this link! Front Upper Spring Mounts or Chevy Dana 60 Front U-Bolt Plate | Leaf Spring Plates and Perches | WFOConcepts.com If you want to run a sway bar I take 3/8'' thick x 2'' wide cut a couple of tabs about 2 1/4'' tall drill...

All I did was remove the resistor and hook it direct just used a in-line wire fuse as you should! yes have checked and the wire fuse is good! without the key on if you hit the bypass glow plugs work great and truck starts . If you turn key to the run position then there is no power to the glow...

I would think that puller will work ! If you were closer I lend you mine or even come over and help the wife says Texas sounds good about now getting freezing rain and snow out side now will be nasty in the morning! as its 32.5 on the thermostat out now have a spare room for a few days? :beer:

Nice looking repair! will look good when your done!

Be careful 1 is never enough! :driver:

I just put mine at 14 My buddy in Nascar "smoke" Tony Stewart

Welcome to the site and the sickness! :lol: Sorry to hear about your other problem! lucky for you ,You started the cure for that Ford thing won't ask how you got it none of my business, Glad to hear you are getting better! [thumbzup] hope you can completely get get rid of it!rofl rofl

Check out this link may answer your ? Chevy Vent Window Replacement Photo 5 Not sure if that is the stud in ? hope it helps!

Got a strange one for you guys I will look into this weekend but thought I would throw the puzzle your way! my glow plugs were not working! wait lite worked and cycles! SO i got new glow plugs g60's also got wire ends changed them no problem while I was at it put in a bypass switch no...

Welcome to the green got to have another disease ! just so you know there is no known cure!

TCUCV Truck looks really good! [thumbzup] Nice job Looks like a couple of nice wheeling spots :drool: you have makes me want to load up my 66 gmc and come play! Buddy's went playing in the mud Saturday but I had costumers I had told I would work on there stuff so couldn't go aua the only...

Wow you posted and answered one of my questions as I was typing! Nice looking truck. [thumbzup] I now what it's like finding a clean early model truck truck if the rust has not got them the high scrap prices has! Thats why most on here has that green sickness I got my m1028 it spent its life...