Search results

1) I want to run 120v only. Do I need to make any jumpers inside the genset? 2) why Am I getting voltage at the lugs when the genset is on and breaker is off?

Does anyone remember the thread where the guy cut down m101 fiberglass side so they fit in the stake pockets of his cucv? I can not find it anywhere.

Has anyone done this? Seems like I would need everything and just extend my frame. The pot works off the transmission I believe. The doner would be a m923a1

The breaker is on and I'm getting voltage at the lugs. Can someone help me with the diagrams. It shows its m5 but I'm kinda lost after that.

Who make a good replacement ring and pinion? The factory one was not able to stand up to my abuse.

Where can I find nos parking brake cables? I bought 2 from Saturn surplus and they are 5 inches too long. The numbers say they should fit, but after doing some research other people have had the same problem. Is there a place that can build them for you?

Going to look at a mep016d that will not produce power. What are some of the things to look for? Bad voltage regulator? Need to field flashed? What do you think a fair offer is for the genset?

Anyone have the part number for the gasket on the auxiliary fuel filter? I'm guessing some have filters and some screens. I have seen part numbers for the filter but not the screen. Mine has the screen and its leaking pretty bad.

Just picked up a mep-016d. Come to find out the belly tank is cracked in 2 spots. (Plastic) are they all plastic? I thought they were metal. Anyone know where I can get another one?

When I turn on the right or left turn signal the other side has a very little flash like it's back feeding the other side. I didn't think much of it until I installed led trailer lights and the little voltage that it produces is enought to flash the clearance lights. I checked all the grounds on...

My new project secm m887 body on a m116a3 trailer.

Hi guys I'm from upstairs at the cucv and m35 forums. I picked up a m887 truck yesterday. The box is in great condition unfortunately the truck will be heading to the scrap yard it's very very rusty. I was wondering if anyone knows where to get replacement T handle latches for the box? Looking...

Anyone making these kits anymore?

Where can I find 1/4 turn replacment fasteners for the cargo cover? I know m880's use the bolt in ones, so they will work also.

https://m.youtube.com/watch?v=akLKm1hOh2A

Some mice had an orgy in my lower control box. I put out some bait and one o them died inside the control box under the wire lugs. I was able to remove the nest (dog hair) and dead mouse. It stinks and there are little sprinkles everywhere. How can I clean this up? I'm gonna hook up a rubber...

Will these work together? I have been reading mixed things. I do know as of now some of the bolts do not line up on the bed rails. So can anyone confirm?????

I have a 1996 nv4500 out of a k2500 350 gas jobber. The only thing I can't figure out is the hydraulic line. What did you guys do to adapt a internal slave hose to a 86+ master?

I want some new tires what do you guys like better mtr or bfg. I'm leaning towards mtr.

How do I know how to set the generator to 240v single phase. This is nothing like my mep002a? The manuals to not go into this. Also what's the chances someone installed. 400 hertz gauge on the genset? Gen head says 60cps and runs drills etc.