• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. edpdx

    Found this here among the threads...

    Looks like I'll drop my tank and see if the sending "sock" filter is to blame for my loss f power. As I was readin the forum on sending unit replacements I found https://www.steelsoldiers.com/attachments/img_3721-jpg.301195/ But I found the following in the 34P TM: 3PAOZZ 11862 [Part...
  2. edpdx

    Does the TH400 have a "Limp Mode"?

    I have read several articles about transmissions that give out and render a maximum speed of 35MPH- to "Limp Home". The issue seems to be a shift solenoid.. Is this a thing with the 400?
  3. edpdx

    M1009 suddenly only crawls, eventually tops out at 35 MPH.

    On my way fishing- never happen when I'm on my way to get a root canal, and the pedal feels off as the engine starts bogging. I can keep the Blazer moving t get off the highway, but only just. Visual inspection turns up nothing. I limp back into town, find a diesel shop, but they can only guess...
  4. edpdx

    Secret for installing a lift pump...

    The last two pumps I installed (Delphi) went in just as the others I've replaced in Chevys and Fords over the years. The last two, though slipped around on the end of the crack rod. It was up as far as it would go- held in place after freezing the rod and adding a dose of heavy grease to it...
  5. edpdx

    Power loss on hills and above 35 MPH

    Over the last week I noticed a lack of power over 35-40 MPH. I can get more speed, but very slowly have to work up to it. If I get on the freeway and try to maintain 60ish, I get vibration and shutter. I've read as many posts as I could find here and have already changed out the spin-on fuel...
  6. edpdx

    Diesel Purge Directions

    I've used Liqui Moly OR Lubro Moly and done this a couple of time in the past. I use to have a link to the hose setup, but I can't find a working link any longer. Does anyone have a description of what goes where in order to feed the can of Diesel Purge directly to the IP while putting the...
  7. edpdx

    Broken Starter Bolt removed. Easiest method I've found.

    Broke off a starter bolt. Here's a video I made of me extracting it without drilling or tapping in extractors. Not my idea- I found a Youtube video from a Mercedes Mechanic that had similar problem with his Suburban. His mechanic came up with this field expedient method. The pick I used was a...
  8. edpdx

    Possible rear main leak fakeout.

    I've noticed a leak under the Blazer that looks like it comes from the area ahead of the torque converter. While pulling my Vacuum pump to replace the POD, I see the gasket is just a memory. It's pouring rain here in Oregon, so I'll have to see later if the cause of the oil leak might have been...
  9. edpdx

    Rear Main Oil leak on M1009. Could the oil cause shifting issues?

    During a 500 mile Road Trip I experienced what felt like stuck-in 2nd on the freeway. The sound just did not seem high enough, and there was a floor felt rumble. I thought I might not yet have shifted into 3rd. After sever miles, the pitch went up and, at least felt like 3rd. Any reason to...
  10. edpdx

    M1009 Brake and Turn Signal creeping crawler FIX

    So after checking grounds and replacing brake/signal lamp sockets on my M1009 because of intermittent failure that turned to abject failure, I finally figured out what exactly the problems was. The OEM socket, seen here with a metal ring flange that the bulb lugs lock into, had become corroded...
  11. edpdx

    Does anyone else get poor readings from 6.2 added temp gauge?

    After adding a gauge on the passenger side- removing the block off plate and adding the bung and thermostat switch, I seldom get a temp reading on the new gauge. Seems like the switch is too short to contact the coolant. Any one else have a 100% dependable gauge? What brand?
  12. edpdx

    Left rear taililight running light comes on with headlights, but Brake Light does not

    Fellow driver indicated that my Driver rear Brake light was not working. It has been intermittant the last few months. Someone brings the condition up, I look, and it is fine?!?! I replaced the socket today, but same deal. When I check for continuity from the supply wire (on the new connector)...
  13. edpdx

    Spots of fluid on my tailgate

    I noticed Spots on my Blazer a couple of days ago. Looks like brake fluid, maybe. I'm not sure, but since I'll have the wheel off to see if the drums are leaking, I'm on my way to the parts store to get some new wheel cylinders (I have brake shoes and a hardware kit on the shelf). It's been...
  14. edpdx

    New Bilsteins good rubber and proper Tire Pressure... still somewhat jarring ride.

    My M1009 is starting to give a rougher ride- things rattling on highway, let alone off road. Feels like I have 50 lbs of air in the tires. I'm not a suspension guy beyond shocks and sway bar bushings. What can I do to restore my suspension? Some of the post I've read here say NO to re-arched...
  15. edpdx

    Got broken into today

    I went fishing this morning. When I got back to my Blazer, some Richard had broken my wing window out. My Get Home bag was gone. My limited tool bag was gone- not much of a loss on the tools. The GHB stung though. Insurance will cover the window. The other items are covered only under my...
  16. edpdx

    Should I have been draining water from my new SPIN-ON?

    I have another thread regarding poor engine performance, but I am not sure this question has anything to do with that thread, so I am asking in a new thread that maybe easier to find... if you are wondering about spin-on filter maintenance. This is what I have- there is no provision- at least...
  17. edpdx

    After 300 mile roadtrip I got back home to slower speeds and a noidy off-idle rattle.

    I changed the glow plugs, the injectors, oil and tranx oil/filters. The radiator does not leak, the fuel filter (OEM) was replaced with the F100M round filter system and gauge. The 300 to the destination went off w/out a hitch. The return trip started feeling tinny, and weak the last 100 miles...
  18. edpdx

    Wires crossed caused Blinker Indicator to come on with Headlights.

    Happy Thanksgiving. Ok, so I messed this one up. I have been frustrated with this problem since I bought my M1009. The left front marker/turn lamp wasn't blinking. I checked the socket and grounds. Dirty (corroded) socket was replaced with a DORMAN socket from the parts store. Only now the dash...
  19. edpdx

    After new harmonic balancer engine feels a bit out of time.

    New harmonic balancer installed last week. But I am detecting what feels like slow pick-up, like you'd get in a gasser if the timing was a little off. Should I suspect the HB, or IP maybe?
  20. edpdx

    smoke from steering column after new 2057 bulb in front right side

    dash left turn indicator has been lighting when headlamps are turned on. Replaced both front bulbs and noticed a small stream of smoke leak from the top of the column near the base of the turn signal lever. Now both dash indicators stay on all the time. What burned?
Top