• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. cyruscat

    Can 12 and 24 V share same ground?

    Hooking up a 24 to 12 volt conveter and wandering if both systems can share chassis ground? Would like to ground 12 volt lights and stuff to chassis instead of running seperate ground wires.
  2. cyruscat

    My Deuce likes WMO!

    Got my filtering system finished and just ran 100 miles on 50/50 mix of diesel and WMO, tranny fluid, gas, etc. Truck ran like striped ape, better than it ever had before! I had previousely adjusted fuel screw to give good boost and EGT so this mixture of alternative fuels was a surprise...
  3. cyruscat

    Installed Pyrometer finally

    Finally got up the nerve to install my pyrometer. Dropped turbo down to keep metal shavings out. Drilled aft side of manifold right before turbo turn down in casting. New gaskets and back together. Using older Stewart & Warner gage that does not require external electricity and K-type sensor...
  4. cyruscat

    Changed tran, Trans, and axle oils

    Had a fun and oily weekend where I changed out all the gear oils and here are findings. Truck had full PCMS by Army about 500 miles ago. Truck has 20,000 miles on it. I drained oil through a clean old t-shirt to catch any trash for inspection. Axles: All three had like new oil, no metal...
  5. cyruscat

    New here from Arkasnas...

    Hello from a fellow Arkansan! When your ready for that Duece you may find a good one on GL out of Camp Robinson, Ar or Red River, Tx. Both close to home for you. Several other Arkansas guys on here to help and chat with.
  6. cyruscat

    Hood latch poked hole in radiator

    Closing the hood on Deuce and it got away from me and slammed shut last foot or so. This caused the hood latch to fly back into radiator and poke pinhole leak. While fixing the damage I found that it had been been damaged once before in same spot and soldered up. I'm going to make a...
  7. cyruscat

    Little story about first Deuce

    Air compressor belt tension is set by screwing outer pully half in and out while holding the inner half still. I rigged up a tool that worked but took several hours of work though!aua If you bring your truck to south Arkansas I'll work on it, but (always a but!) the price is subject to...
  8. cyruscat

    Little story about first Deuce

    M35A2 w/out winch, 1970 Kaiser Jeep, Toole overhaul in 1/90. Trucks mileage 19235 and 1105 hrs. Whistler turbo, electric wipers After downloading and reading all the applicable TMs and reading lots of posts here, I felt like I knew what I was doing. It helps that I have 30+ yrs. experience as...
  9. cyruscat

    Finally got my Deuce out of GL

    Hey, no pics is a big afront!? Now I imagine most of you guys could draw a sketch of a Duece in your sleep! Like I said just plain old Duece, nothing special about it :-D:-D:-D
  10. cyruscat

    2010 VIN Info Thread

    Thanks in advance: A. VIN 052516787 B. Reg. no. 4M53670 C. NSN 2320000771616 D. Bought out of Red River in Hooks, TX E. Unit paperwork in truck, Troop C 1/124 CAV, FMS # 10 E. No markings, all painted over
  11. cyruscat

    Finally got my Deuce out of GL

    Truck: M35A2 w/out winch 1970 Kaiser Jeep Toole overhaul in 1/90 (installed Hydravac brakes, more on that later) PSMC in 5/2008, got new turbocharger then at 19214 miles (service order in glove box) Belonged to 1/124 Cav in south Texas Auctioned out of Red River in Hooks, Tx Event no. 5188...
  12. cyruscat

    EUC over 60 days, auction cancelled!

    I am back in line again waiting on EUC. Started this thread on first truck that timed out with EUC. Current EUC is at 30 days. Funny thing on first try was that I received a letter from Battle Creek saying I had been reviewed for EUC about 5 days after GL refunded my money. HA! Make you go...
  13. cyruscat

    Boarding Ladder theft

    No promises from GL Previewing a M109 with ladder, asked if ladder went with truck? Reply was that he could not promise that because the GL stuff was used as spare parts depot by local Army units! GL rep. at Camp Robinson, AR. told me that the soldiers have free reign to come and take any...
  14. cyruscat

    EUC over 60 days, auction cancelled!

    My lost winning bid was on a truck and trailer at Hooks, TX. After 60 days GL cancelled sale on me. At 92 days I got the EUC letter in mail from Battle Creek, just a little too late! I am watching for more Dueces to come up for auction in Hooks or Little Rock. Better luck next...
  15. cyruscat

    EUC over 60 days, auction cancelled!

    Battle Creek sucks! I checked my GL Invoice and it now says VOID/CANCELLED End of story, no M35A2 for you this time. I had won a really nice one with winch at decent price and now I have to start over again, maybe. I am thinking of looking for a private purchase if I can find a decent...
  16. cyruscat

    EUC over 60 days, auction cancelled!

    Time line: Submission of EUC Pending 9/03/2009 EUC revisions requested 9/10/09 EUC sent to Battle Creek 9/14/09 Cancel 11/23/09 Talked to GL and they had me send e-mail to GL management asking to extend my EUC waiting period. Recent E-mail from Battle Creek Sent: Thursday, November 19...
  17. cyruscat

    EUC over 60 days, auction cancelled!

    I received this notice today, I am so mad I could S@#$ :evil:--------------------------------------------------------------------------------------:evil: The EUC for your Sale number 4663 was sent to DRMS for approval over 60 (sixty) days ago. As of today, no approval has been received, with...
  18. cyruscat

    Deuce look over by more experienced eyes

    I remember that truck back when I previewed all of them at RRAD on Event 4663. That truck and another parked right beside it (missing driveshaft) were both Air Force trucks. See big blue instruction plate on dash. I ended up winning the M35A2 w/winch parked right in front of yours. I went...
  19. cyruscat

    Any one going to Petit Jean MVPA Show?

    I hope to be there but don't have my truck out of the GL bunch yet. Waiting on Battle Creek office. But now that I know that some of you local guys will be there, I just have to so I can meet you in person. Cyruscat
  20. cyruscat

    Hooks, TX preview report 9/1/09

    Won a M35A2 w/winch and M105 Won my first Duece and a 1.5 ton trailer to go with it. I checked these out as mentioned before and truck won is the one I wanted. Pics to follow. Now the paper chase starts! Yeah, GL lady in Hooks said I had a time limit of 30 minutes on the phone and then...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks