Search results

Im looking for the proper wire harnesses to connect my M101 to my Power Wagon. With the connector box shown, what cables do i need to go from this box to the rest of the trailer, and from this box to my truck? I have found lots of cables in the TM's, but Im not sure what part numbers from...

So once again, Im using pictures of someone else's trailer. If the owner of this trailer is on here, please forgive me, but alot of what you have done, I want to do. So, after a long drawn out search, I have found the brake handles I needed. Now I'm building the gates and bows with all new...

Anyone see this? Military 6x6 custom trailer cargo box M35 racks dual :eBay Motors (item 230374787558 end time Sep-12-09 16:16:44 PDT) I think its pretty cool, too bad my little Power Wagon wouldnt pull it. How much ya think this thing weights? Nick

I finally got lucky enough to find the style brake handle I needed for my 52 M101!! Now all I need is to get on the local mill to finish the oak wood for the gates and bows, then sandblast and paint, and she is DONE. Ill post more pics in my album when I get the wood, hopfully next week...

I may have learned something today. Scary thought. Are M101, early models, like a 1952, and M100 brake handles the same thing? If they are, is there a difference between the left and right handles?? Or are those interchangable? (Again I'll attach the best picture I have of the style...

:roll: but I'm looking for a source for the square lock washers used on Power Wagons and M37's. Anyone know of someone that has em:?: Thanks Nick

Im looking for a drivers side brake handle for a 1952 M101. Its the flat style the go parralel across the front of the trailer. I have sent emails to most of the parts sources listed here and no one has even sent anything back saying no dont have it, or drop dead. Does anyone have a 101...

Well I was out tinkering on my trailer just a little bit ago, and I noticed something on the cover I have. Its the rubberized vinyl one. On the front left corner, near the tie down, it says "GMA Cover Corp". it even has a web address, www.gmacover.com I'm sure there are alot of you that...

Short of sand blasting, what can i use to get the paint off my trailer to prep it for new paint? Ive tried oven cleaner. It barely took the overcoats, and there are about 5 or 6 colors, and where the military paint is visible, it didnt even touch that. I knew i shoulda just sandblasted the...

Saw these on eBay and was wondering with the description he gave, what exactly they do.:?: Item number: 370141880502

The safety chains from a V-419/GRC-201(??) Would they be sufficient for a M101??

I have found a cover for my 101, but it's the rubber or plastic or whatever it is. Its military issue, but not canvass. Does anyone have one of these? Are they better or worse than canvass? How durable are they? Thanks

Is there a need, or Calif requirement, to have clearence lights on the sides of an M101? I have the rear lights set but I'm wondering if I should put some form of lights on the sides, besides the reflectors. When i got the trailer it had those semi trailer style lights front and back. My PW is 6...

Are the M101 trailers still in use in the branches of the military? How long were they used? The rewason I ask is if I can find a base or depot close, maybe I can find some of the parts I'm looking for to complete mine. Then I can find out what I a complete, authentic one looks like. Nick

I have loaded all my pictures of my 52 101 in an album on this site, now how can I see if you all can see them?

I have found one handle so far, its a right one. Does anyone have deltailed pictures of how these are mounted?? I am still looking for a left one, but I need to see how they are mounted to the front, then how the pivot arm is attached to the handle. By the way, this is a 52 M101, so they are the...

Well my M101 is done except for paint. I towed it to work the other day with the plan of getting it ready for the Hollister (CA) Power Wagon Rally. I planned to haul my motor, transmission, radiator and 5 new Denman NDTs back. But I forgot to put cotter pins in the hinge pins. So of course one...

Well I got my wiring and bulb issues figured out, and short of a little body work, my 1952 M101 is just about done. I had to run wires from the front turn signals and the third brake light on my '01 Dakota to get the rear lights to work properly, but they do. And I bought a pintle hitch and...

First of all, I was wondering what is considered an early M101 and a late 101. I have a 1952, so that would be....??? Second, I have a lead on brake handles for the trailer, but I've seen so many different kind. The lead I have is for the round style, kinda like in old micro lock truck brakes...

I am looking for someone that reproduces the data plates for an M101 trailer. I have the orignal one, but it has alot of holes drilled in it and calcium build up and I would like to replace it with a new one. Does anyone know of anyone that reproduces the data plates?? Thanks Nick