Search results

Looking at a M816 but it is missing the control handle assembly but the hydraulic valves are there. I know some wrecker parts can be gold plated so my question is; any idea what a set of control handles would go for? Thanks, Charlie

Looks like a m1061a1, rated 5 ton trailer.

They make a great platform to stand and work on the boom or cylinders, on a backhoe.

Welcome aboard, make sure to down load all the TM's for the m35 in the technical manuals section.

Very nice work and set up!

For every one saying it is the law that you have a buzzer, maybe you should look up FMSCA 393.51 it is either or. (2) A warning signal that is audible or visible to a person in the normal driving position and provides a continuous warning to the driver whenever the air pressure in the service...

There are valves on the air lines by the cat walk that must be opened.

Wanted to thank Glen for the Great hospitality today! Sorry no pictures I left my camera in the truck. Got 6 like new 1400-20 tires on rims! Thanks for letting me roam the yard!

Where did you get the bad fuel at? I ask as I bid on a load going to AK. Glade to hear you are rolling again!

If it was an RRAD reset expect to find some things only finger tight. IE, went to put air to the trailer, large air leak at fire wall. Tighten the line up all was good.

Did the coolant filter on my m931a1.

When trouble shooting a air leak, I close the valve to both the primary and secondary from the wet tank. This should allow you to determine which side of the system the leak is on.

Open cab cckw , replaced the cab with a civ one?

Couple of small pulls on US97 in WA and CA nothing to write home about, good road I82 down to I5. However there are three hard pulls on I82 between I90 and US97. Run this way all the time at 80k.

If you have driven thru BC and Yukon, disregard. At the AK Yukon boarder there is a fuel stop in AK will be the cheapest fuel till you make WA. Teslin Yukon is going the be the cheapest fuel on you route in Canada. Most fuel stops on your trip are only open 8am to 6, 7 or 8pm so plan...

Door glass and doors are the same on M35 and m939 5 ton.

Glad that you made it, you are a much braver sole than i

I have a 53' stepdeck with ramps, I'm hoping that GP will push it up on the trailer. I see from the pictures in the yard, they have a bunch of construction equipment, my hope is they may have a ramp at The Springfield Illinois location.

From the TM is this true? (3) The XM979 and XM1061 can be towed safely by a vehicle without airbrake connections through the use of the inertia brake system.

That's LA469 hwy, off of LA 28 also a truck gate on the north side of the base.