Search results

Hopped in the truck, heard a pop and tried to start and then nothing. Ideas? Never had a problem in the past.

No, this was mounted under the dash, inside the cab against the firewall about 3/4 up from the floor about inline with the gas pedal area. This is a M35A2C, my other M35s, show the mounting position shown in your photos. Thanks for the photos, always very helpful! I printed up the CAD, but...

I need the wire numbers and their locations to install this under the dash on the drivers side. I did have all the schemtics and the TM, but lent them out. Need to move truck in the next two days, no time and patience to look up all the info again. Please, any help, would be greatly appreciated.

Give me a call.

The weight is around a ton, they are heavy. We used a 5 ton crane to remove the last one.

I just sold a drop side bed, I love them and the noise wasn't ever an issue.

Thanks for the replies work, they currently fine. Someone told me I had to get another flasher when I went to LED. Assume the best advice would be here!

I upgraded my turn signal and tail lights, do I need to upgrade the flasher control unit also? If so, part number and vendor information would be great. Thanks!

Thanks for the responses.

Just purchased a Deuce, anyway to tell if it is a 1A? I know there was a configuation that was put out that year that had the 5 ton engine with a winch setup. I did look though past posts and visually there was the two engine mount holes at the front right side on the lower block (turbo side)...

Thanks for the numbers, mine was mounted on the inside of the cab. Thanks for the pic, pics are good for the electrically challenged!

I used both the Lizard Skins, the soundproofing and thermal protection after I stripped out the cab. I then used Dynamat on the firewall inside and custom cut stall mats from Tractor Supply for the floor area. I used a table saw to cut up the mats, that seemed to work well and was able to make...

Fixing someone's nightmare, electrical is not my strong point. I have manage to get most of it, but there is a two prong circuit breaker, I assume that is supposed to be mounted to the firewall somewhere, which number wires attach to this left to right. I do have the list of numbers, but can't...

Thanks to everyone for the replies. New rims it is...

Bought six tires from GL thinking they were MRAP to pick up and to find out they are for a LMTV! Is an adapter plate for the M35A2 available for these rims and do these tires fit on a M35A2 (395/85/20)?

I need a trailer bed for my crew cab to install a small box. The measurements of the box is 104" in length and 63" wide. Thanks. Kim

I have an 1987 M35A2C and I bought it in large part for the dual circuit brake system.

I hope he keeps the thread also, filled with very helpful info! I contacted him on the phone and here, he is not doing the plates any longer.

Since peashooter is not doing MRAP plates for the M35A2, anyone have suggestions about who has the best quality, 1/2 thick adapter plates for the M35A2s? Want to get my tires on before the snow flies!

Anyone know what screws needed for these hinges? Appear to be a large a type a flat head machine screw which sits flat inside the hinge itself.