Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I don't know if this has been coverd yet, I only skimmed through the posts. I bought an 81' Mercedes from a guy in Ga. with no title. they don't issue them on cars that old. I went to my DMV with purchase reciept and previous owners name and address and was issued a Mi title. They just did a...
Stretch, If You loose another element in your pre heat tank maybe try a cattle water tank heater. A guy i work with has used one for WVO for years and it will get it to 160-170 deg. in an hour or so.
My buddy had a truck and 36' Airstream stuck to the axles. I told him I would not get close to it because there was 4" of water and 200' between where he was and I. I had 200' of 3/4 cable took longer to rool up the cable than to pull him out. I would not have gone near that truck,stay on the...
YTS, Is there a way you can close up the holes there getting in? 50 is alot of critters! The bucket does work , jury is still out on the peppermint oil. I hopped in the Deuce back in the fall and as the low air buzzer came on a mouse jumped out of the bottom of the dash and almost ran up my pant...
I would try Sam Winer 330-628-4881 ask for Robert or, Memphis equipment, White Owl, or Saturn surplus. One of them will have it. also be carefull not to cross thread it or the PITA factor will increase!
I would not remove that oil line until i were shure it was leaking just because of the pita factor. a good hydyaulic shop or farm tractor dealer could make that hose for you. or you could buy one from the many usual suppliers. wash and hose that sucker down and like was mentioned start at the...
With the LDS isn't it supposed to smoke alot? My dump smokes like an old steam train until you get up to speed and then it clears right up. and i get 7mpg:oops:
Put the relay box on today seems to work right. I do not have to flip the master several times to get power. The batterys are down so it would not start ,but I know it is working because before it would stop dead and I would have to flip the master again.
From a Michigan member to South Carolina members, I may end up down that way and would like to have some contacts incase of trouble.
Thank's in advance
So if I have to flip the master switch back and forth a couple times to get power and then loose it when I hit the start button it is most likley the Relay box. Rebuild or replace?
Cranetruck, how have the rebuilt relay's been holding up?
Check the check valve on the return side of the head. I found one that had what looked like weed stalks in it and held it open. After you shut it off all the fuel siphoned back to the tank and was a son of a gun to re-start.
There is a company called Startron that makes a biocide/enzyme. It is supposed kill the bacteria and the enzymes dissolve the crud. I have never used it but was told of it. I think he said large ship yards use it.