Search results

I have not installed a Military radio, but I have installed a jump seat out of a Nissan King Cab. and mounted a CB and cup holders under the jump seat. The seat fits between the two standard truck seats perfect. If you need a picture you will have to wait untl the weekend.

I only use the heater when it is above freezing or below. Heck the temp up here is in the 50-60 degree range in the summer and 20-45 in the fall. The only time I use it is when it is is in the fall and winter. It starts just fine without it untill it gets colder 35- 0F I use it along with the...

I use the Manifold switch before and during cranking the motor. after she fires keep the switch engauged until the motor smooths out. also make sure you have some kind of additive that will prevent jelling in the tank. Stanadyne, Power Service, etc.

Here is what I do Get 4 4x4x10s and 2 2x12x10 and lay the 4x4s together and lay the 2x12s on top Works fine for side by side and ATVs also will store under the ATV to unload it. You can shut the rear tailgate also

No spare I assume

I worked around the cabin and really did not hunt, did some fishing and work on Troys cabin, was the warmest I can remember . Looks like everyone in your camp did good.

Hey Wolfman congradulations on the Hunt, nice looking moose. Sure was nice this season, and warm too. Scott

Yea my brother lives in Midland Hot area to live

I heard of anywhere fron $10,000 to $13,000 for a A3

I went straight up to the frame and looped the hose down. the clear plastic tubing will alow you to see what is going on. Ran this set up through 4' water and 800 miles, no visable pooling in the line

might be able to find the charges on Egay and use UPS Ground for probably next to nothing. I live up here and sometimes spend more for shipping from the lower 48 for the products purchase price.:evil:

I ran the clear hose using the barb, ran it up from the axle to the frame and looped it down for going through deep water, that way the water will catch in the loop and not get into the axle. also can visually see if anything is hanging in the loop that needs to be emptied.

it be #17 bushing

king pin bushing , worn tie rod ends, loose lug nuts etc.

Not sure if it will clump up while getting it into the valve stem, some people use air soft pellets, BBs,antifreeze,etc. Sure took a long time getting the beads into the inner tube ,and I was using an engraver to vibrate the beads into the tube.

I got the Dynabeads and said I would get back of what I thought of them. I had to put in 16oz of the beads per wheel. Had to take the tire off and remove the valve core. Putting in the beads is $@*!ed up. they would plug up and I would have to pound on the stem to unstick the e.t.c. after...

FSBruva I have been waiting 3 years for you to get back to us on the Dynabeads. So I just ordered some and will let you all know how they work.

hub flip

Do you already have these tires? or they something you are thinking about getting. I went with the 11.0 x 20 this is a safe size for that rim Plenty of info on the Hub flip.