Search results

Does anybody have any idea what kind of genny this is? I just won it on GL today and have no idea what kind it is, but it looks cool. The pics are from GL.

I'm drawing a blank, what is the TM # for the LDT-465 IP? Thanks

Has anybody removed the hydraulic head without lining up the timing mark? I just f**ked up and did, now I am trying to figure out how to line everything up to install the new one. Thanks for the help.

Does anybody know if you can change out the fittings in the hydro head that the injector lines screw into? Or do you have to change out the whole head? I just looked at the TM on the pump and nothing. I've tried cleaning the old lines and these fittings, still leaked. Then new lines, still...

Here goes, 2 of my injector lines are leaking. Its between the nut and the hydro head (pic attached). I assume there is an o-ring or seal of some sort in there but I cant find anything in the tm9-2910-226-34. Thanks for the help.

Well I finally got around to installing my pyrometer today. It was alot easier than I thought it would. I am trying out the clamp setup to see how well it works, later I will tap the manifold. Instead of removing the turbo, I drilled a very small pilot hole w/ the engine running. Then w/ the...

My alternator quit about a month ago. I finally got around to replacing it thursday. Still no charge. Today I took the old one apart, when I did I expected the regulator to be shot. But one of negative stator wires was melted, and the stud it was soldiered to was broken. Has this happened to...

I picked up my light trailer yesterday from Chambersburg. Here are a few pics of it. It needs alot of electrical work but the trailer is in good shape. Matt

Anybody else on here win one of these today? It was nice no euc. HIGH-LITE CORP MDL HLT-3K-5K-MIL TRAILER MOUNTED FLOOD LIGHT SET. Does anyone know what the tpubs are for it? Google is not my friend tonight. Thanks. Matt

Went to go pull out another vehicle, an f-150. Lets just say nothing went as planned. We ended up using a 9000 lb winch on a wrangler to pull out both trucks, after we strapped it to a tree. Its time for some new tires and a winch. On another note is the locker in the rear supposed to spin both...

I have a 1010 that was converted to a regular cucv setup by uncle sam. I noticed the driver side alternator is only running 12.3vdc when running, and the gen 1 light does not come on. the passenger side alt. is putting out 14.6 when running. I figured it was a bad alternator so I switched them...

I just talked to gl today about my sf-97 submitted on 15 sept. I got the usual "we have not received it, can you resubmit." :x They recomend getting in touch with them 24 hrs later to see if it was received. That would have been nice to know a month ago. :evil: Matt

Does anybody know what if any model this is? Thanks for the help. Matt

Does anybody have the measurement between the wheel wells on the trailer? Thank you and good evening. Matt

Does anybody have a good close up of the wiring panel in the attached photo? Mine is a mess. Did these have an inverter on board to power the flourescent light or is it dc powered? I cant seem to find much about these in the manuals. Thanks for the help. Matt

I picked up my m1010 today from Portsmouth with out a hitch. The people there were very helpful. The truck started right up so I was able to drive it on the trailer. I will load pics when I find my camera cable. On another note the government has changed the elec system out for a regular cucv...

Ive done some searching but am still confused. What is the best way to bleed air out of the fuel system after the injection pump? I have replaced the IP, injectors, and return lines. I also cleaned out the steel lines. Thanks Matt

Has anybody ordered anything from this company before? I bought a rebuilt IP and injectors for my 86 1028, and as soon as I turned the engine over fuel was coming out of the throttle linkasge on the drivers side. When you are cranking the engine it is almost a stready stream. I followed the TM...

I picked up a cheap 1028 the other day that hasent been started in a year or two. I've changed the fuel, bled the system to the filter, and cleaned the governor housing on the ip (it was lets just say nasty). After a bunch of cranking the ip fills with fuel but nothing to the injectors. I have...

I have a 1983 W350 that under the blue paint it is od. It was also an ex-forestry truck, parts are that puke green. If this was possibly a mv does anybody know the designation? Matt