Search results

It's the flame heater for the intake remove it! It's very easy and saves alot of problems

I have 6- 1400r20 and they are in pretty decent shape tread is like new but there is some cracking but not enough to worry me. I got all them for $400 and they were all holding air which Is good

How do the XL's wear on road and how do they perform offroad

Go with co2 it's cheap but do not run 100% argon it's to hot for steel and the carbon needs the co2 to cool the tip and burn properly. We use 100% argon for aluminum only.

Hey rokd..... When you cut the back off your cab did you just draw a line and cut it like a slice of bread or did you surgically peel apart the different sections. I've been pondering how to do mine. Since I'm using 3/16" for the floor I think I'm going to cut mine like a slice of bread and move...

This is a awesome thread. Just read all of it.... My m35a2 most of the time is referred to as "the deuce" but it's name is "Double D's" standing for ...... Dan's Deuce lol

I got a parker valve from work. We use them on lift axles. It's parker #520511000.

So I got the valve today and it's going to work perfect..... the other valve for the transfer case will mount right on top of other valve perfectly. Need a few more fittings and I'll be golden

I got the pump in the mail today

Here's a picture of the battery box in the truck

Expecially when It worked before

Cool I'll call Monday and order the seal too. I hope this one fixes it. I can't figure out why the old one doesn't work......

Hmmmmmm thanks I was thinking it would come with the thermostat the way the tm reads.

Yeah it should I measured it all out..... and I got the THM 358180. It had to be ordered should be here Monday. It was $31.77 plus tax. Hopefully it works

So its definitely the thermostat..... I took it out and the truck never got over 140°. Have a new one coming Monday from napa. Does anyone know if they come with a new seal for the housing too? Got a few other things done today but not as much as I wanted cause of the thermostat problem. I got...

Thanks

Why was this joined with my mod thread and why was my thread moved to the regular deuce section? Don't some of yous complain about posting mod threads in the regular part????? Anyway guess the thermostat is bad. I put it in a pot and while I didn't have a thermometer it didn't open till the...

Yeah that's where the heater was and will be and also the filter...... There is no air in there. It's just flowing back around but the valves are shut off. I'm going to check the thermostat tomorrow and try to bleed the system again..... but the more I think about it I'm pretty sure the...

I don't think it's the radiator..... it doesn't even get warm.... It's either a air pocket but most likely the thermostat is stuck and won't open. It wouldn't go over 200° but it wasn't letting warm water into radiator. .... I'm going to pull it all back apart tomorrow

Thanks I just hope I can figure out why it's running hot