Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
What did the base look like on those seats? How much fab word did you have to do on the drivers base and the other seat bases?
Sent from my iPhone using Tapatalk
Before you dig to deep check the heat shields on the exhaust under the dog house. Every truck I have ever spent much time in rattles there. Get some of the metal zip ties used for exhaust rap and tie them all down. If they aren’t rattling yet they will one day so go ahead and strap them down...
Well I already own the biggest budget buster. I have a mildly built 80E on the bench now so that’s my motivation to do a civi swap.
The drive shafts are not a big concern as a good friend owns a shop that builds shafts.
I am currently looking for a 242 but no luck here locally. I also have...
I am considering a 4l80 swap and because I have one sitting in the shop ready to go I am thinking about using a Civi unit.
I have the controller picked out and I have that sorted out but now I have transfer case questions.
For the people who have done this swap did you use the transfer case...
Any interest in an 997 ambulance top for a hmmwv? I stumbled across. I would like to swap for some hmmwv parts or cash.
It still has the AC unit upstairs.
Sent from my iPhone using Tapatalk
There are quite a few people that have done 40’s with a 2 inch lift. Most use body lifts but a puck / suspension lift will do the same thing.
Sent from my iPhone using Tapatalk
I got my hand slapped for posting a direct link but you can get the coil spacers off of the big evil auction site. If you search for
Hmmwv Humvee H1 coil spring spacer suspension lift
you will get to them. I think they are $200 for a set of 4. I haven’t tried them but I do have a set waiting...
Can anyone put a tape on the inside dimensions of the bed on a four man configuration? I need to know what the width is inside of fender to inside of fender as well as from the rear curtain back to the tailgate. Any help would be appreciated!
Sent from my iPhone using Tapatalk
A quick and dirty test solution would be to stick an incondesoint bulb in line somewhere in one of the light harnesses. I have had to do that on a few led lit trailers I have picked up over the years. I just stuck it back at the frame and hid it.
Sent from my iPhone using Tapatalk