Search results

Vary rare.. Kind of rough.. Save that box! A good metal work guy can make it like new again. What do they want for it? I see the winch is gone is the PTO on the transmission? It is probably a M56B1 Chassis..

All of the clutch numbers through CarQuest are coming up a no go. I can get the throw out and pilot bushing through them and have them on the way. I think I will have to just have it re-lined. Does anybody happen to know the model of Massey Ferguson tractor that has the same motor and clutch...

My CarQuest here can send the clutch to someone in Detroit or Flint but said it took 6 weeks to get the last one back. I had him run searches for a clutch in the 68 Power Wagons with the 251 and it kept coming up as no longer available. Thanks for the part numbers guys I will see what he can do...

Thanks blybrook I will give it a try. I have also learned that some of the Massey Ferguson tractors took the same clutch set up that I need. I am looking into some of the old tractor sites and parts dealers right now.

I am looking for a new 11", 1 3/8 10 spline clutch for my Canadian M37 with the ACME transmission. I would also like to locate a new throw out bearing and pressure plate with the 4 arms " fingers" for it. I know I can have the clutch re-lined but it will take 6 weeks to get it back. Someone has...

Welcome from the Tip of the Mitt..

Just a bump.. Are we going to have a Steel Soldiers area? What's the plan all mighty OD gods?

Eastern Surplus has a listing in the classifieds that they have 10 CUCV's they are parting out. Maybe see if he has any M1028s. He would have a good idea on shipping too..

Your welcome.. I know shipping has gone up but 1 pallet might not be to much money. Unless Canada's shipping is real high? This I do not know about? A good spring shop could probably rebuild your M1008 spring and add the helpers/overloads just like the M1028 for a decent price.That might be a...

The payload on my M1028 with single tires is 3600lbs with a 9400lb GVW. The tires are rated for 3042lbs at 80PSI per tire in the single configuration.. A sway bar would be a nice addition but it handles green firewood stacked higher than the cab just fine. I would think a good set of M1028...

Because of the empty weight you will have to get it titled in Michigan $15 and plates are $75 .. One time plate.Take the data plates in with you.

Just make sure the lug nuts are tight, tires inflated, and parking brakes are off and loose.(maybe grab the spare off your deuce) If your using a CUCV I would flip the pintle hitch but sometime they can be stubborn. You will need a strong buddy to let it onto a cucv they sit lower than what the...

There are some pictures in the beginning of this thread. I appreciate the offer srodocker but that is kind of the wrong direction. I found a trucker through Uship and will probably go with him (hopefully this time it works out) but I can not get a reply from Reuben through the PM avenue. Anybody...

I accidentally deleted a PM with Bigelk50 "Reuben's" phone numbers. If any of you guys know how I can contact him please PM me the info. Or if you can assist in getting this truck somewhere safe or even better a ride east. Thank you.... Any of you Oregon guys plan on attending the national in...

Any news guys? I have sent Bigelk50 a couple PMs as of this month Jan 2011 with no reply?? Maybe my truck is a goner? :shock::cry:

Will that M820 be for sale? If so contact me.. I Reeeeeeeeeeeeeaaaaaaally want one!

Welcome from the tip of the mitt. If it was not so cold out right now I would go outside and measure them for you. All the trailer types I have will fit a deuce down to jeep. There is very little difference in the inner hole size from a M105 down to a MB trailer.

I hope he mans up it would be fun to follow him down picking up stragglers all the way. I will be attending the event this year i just cleared it with HQ AKA (wife). Did you guys have a Steel Soldiers area? I am wondering if I should rent/reserve a couple outdoor vendor spots or not.

Another bump.:driver::beer::grd:

Getting back on track here. We have a jam packed agenda in need of membership input and participation. For those who can not make it minutes will be available upon board approval. Thank you