Search results

That is basically what I am planning, but my schematic includes the power source and the PTO relay. I do want the PTO dash light to work, so I need to find the voltage and a good place to tap into that. Sent from my iPhone using Tapatalk

So, I ordered the McMaster part and nuts. I plan to give it a go and see how it fits. At $20 vs $50 it may be worth an addition to the spreadsheet. Sent from my iPhone using Tapatalk

see me post above….. better picture.

Dumb question….. the closest specs I could find were of some that were on eBay. They listed the threads as 1/4-28 and wanted $8ea. Is there any reason not to use these instead? They are 1/4-20 threads, but the rest of the specs are the same. IIRC, they use nuts on thru holes, so thread...

So, as you can see here, I have eliminated all connections back to the transmission and engine while bypassing the transmission checks. you can see blue as my comments. the one thing I do not know what to do yet is the PTO light. That mentions a pressure sensor. I am guessing that is an...

I have an A0 winch with the harness from that. I am installing on an A1 truck. Instead of wiring into my truck harnesses, I am proposing rewiring it to be always hot. I took a crack at the wiring schematic. Will post next post the pictures. @Ronmar any thoughts? Anyone else? Sent from...

number 17.

I need to replace the rubber mounts for my headlights. I searched the parts database…. And the forums. No luck. Anyone know what I need to get off McMaster? Or dimensions? I need to get an order in hopefully today. If no one has the info, I can get to mine later this week, just don’t have...

By the way, I also have a 100a equalizer, but when the tender is on, the equalizer will be disconnected if my battery disconnect is disconnected. That way I don’t put extra hours on the equalizer just to charge when maintaining. Also, the 2 bank Noco was half the cost of a 24v Noco. Also, the...

There is what I use….. not the same , but I am very happy with it. NOCO Genius GEN5X2, 2-Bank,... https://www.amazon.com/dp/B08G3STB1N?ref=ppx_pop_mob_ap_share You hook up one bank to one set of batteries and the other bank to the other set. In essence the red from one bank is connected to...

I am looking for a panel mount fuse box. One that would be flush with the panel face, have an easily removable cover, and conceal the wires and everything behind the panel. What I am thinking is cutting it into the passenger kick panel. Anyone see anything for this? I have looked and found...

That is a great idea. Then you get both options. Sent from my iPhone using Tapatalk

Are you guys putting reflectors on (like tape reflectors) in addition to the stock reflectors or trying to stay less visible for boon-docking? Sent from my iPhone using Tapatalk

Anyone ever route wires inside A pillar? It looks like there is a path, but it looks like a pain to route. Contemplating running down through this hole.

I am planning fiberglass sheets with silicone in the corners. Sent from my iPhone using Tapatalk

Thanks! That will help a lot! Sent from my iPhone using Tapatalk

IIRC…I think it does matter. This was discussed before and the valves don’t work right if reversed or some other issue, like trapping air. I don’t remember the thread, but the debugging for heat not working was to reverse the flow. Also, the direction markings are very prominent, so they must...

The heater has an arrow on one of the hoses. Just trace back where on the engine it connects….. don’t forget this as the evaporator has the same markings. Sent from my iPhone using Tapatalk

Well, I am copying @Ronmar ……. thanks for the great details!

Yes please. Trying to remember which hose is going to the heater and which is coming from. Sent from my iPhone using Tapatalk