Search results

I have a CD that has other than HMMWV files. Maybe I could burn a copy and send it to someone so all of the threads don't show M998....or their variant for the specific vehicle threads.

Yup, unless someone has NOS stuff, Mc master and solder will be my friend

Not a member there, I will give that site a try. The switching valve is indeed on the suction side, mounted on the bellhousing. Took it apart and found that the tapered valve is a tad scored and the top seal is almost non existent. I believe I can repair the valve. Worst case for the strainers...

here are a few pics, in one, you can see how the screen attaches to the pick up.

If it were mine and it had been done multiple times, I would check for a blocked blow-by tube. The valve cover to tube is a cork gasket, IF someone sealed it with silicone or the cork expanded, there would be no place for the pressure to go and would find the easiest way out, in your case, the...

No good pic, It was pouring and I left early. They are mounted on the pick up tubes in both tanks, apx 1/2 diameter hole in the brass ends, the pick up tube runs through the screen. Held on the pick up by a cotter pin. They are apx 3 inches tall x 1 1/4 in diameter. I'll see if Craig can take...

HELP!! Getting the carrier up and running is requiring some parts. FP looses prime, no adjustment on the idle circuit on the carb and the filter is full of.....stuff. Got the fuel pump part handled, Then and Now put together a nice kit, Got a carb kit on the way from The Carburetor Shop. One...

I miss that truck! It still looks great! I do like the front hoist, thought of doing that more than once.

here is a pic of theCasson bunk in the up position, see the black boxes on the wall? those are the hinges.

There are other options for a top bunk, try looking at toy hauler set ups. I have a Carson Trailer ands it uses a pull down bunk that when up, allows a person to stand under it and pulls down 3 feet or so. It is suspended from the walls with spring loaded "hinges" if you will. My sons trailer...

Is there a way to pin it on in the location you want and when not in use the pintle is accessible? Kind of make it pivot up into position and pin/secure it for use and pivot back down and pin/secure it when not in use or needing the pintle?

The guy that restored this was anal about keeping things as original as possible, the only thing I see that isn't "stock " or a repro is the ign coil. It is a neat little carrier, I think he maybe wants to sell it.

Had a chance to get this gem up and running, Has some small issues with the fuel system, guess that's what happens when things sit with gas still in them!! Hopefully in a few weeks I'll take it for a spin around the compound. Working on this for a friend of the Museum, been almost 10 years since...

2 and 5 use the same end sections, I labeled 2 wrong, saw that after I put the pics up. The ends on 4 will only work with 4, same for the log and 3. Progression time wise, 1, 4, 5, 2, 3. There were some funky manifolds made for use in fugly trucks like Ford L series, Volvo W series, Mack...

#1, Log manifold, came on NTC 230 up to the 335. Will fit and work on the NHC #2, 91-95 N14. Low mount, will fit on the NHC, but the plumbing will be funky. Ports smaller to increase velocity thru the turbine. #3, N14 Plus, Nope, will not fit on the NHC, note the mounting bolt angles. Small...

Guess it depends on what parts you have changed. The turbo from an N14 was designed to work with the manifold on the N14, they have smaller ports, different outlet angles and the smaller ports on the heads. All this was done to increase velocity and make things start working faster, all for...

While not an 880, I had a '77 Power Wagon with a 360 in it. I did the 4bbl conversion, Found a factory 4bbl manifold at a junk yard and installed a Carter AVS. Linkage was easy, the kick down is adjustable. Big difference! I had 36 inch Kelly Safari tires on the pig, couldn't climb Cajon pass...

I'd leave 'em like that, it is unique, looks cool!

Stem clean them. When I worked for Navistar, might have been IHC back then, I was in the lease dept. Wheel seals were a common failure, we just steamed the begeebies out of them. I do not recall any failures or quicker replacement times, but that was a while ago. I am pretty sure the linings are...

M105 metal bows are square, apx 1.5 in straight tube. Possibly for a Gama Goat?