Search results

Started pulling tires for rotation (I needed to make sure I could swap one by myself anyway). Knocked the first one out in about 2 hours (using the "2 pipes" method). The torque multiplier worked like a champ. The new air jack handled the lift w/o breaking a sweat. Only issue I had was my my...

You have any pics of your hitch setup?

Here's the tool list that I'm building for on-board (not including spare parts, etc). It's *way* more than you'd want to fly with, but you can always hit a Horror Freight before leaving MO: Glad Hand Air Hose and chuck 20 ton Air/Hydraulic Bottle Jack Two 4' Breaker Bars 1 1/2" Truck Lug...

Nice layout. One thought about the seats before your go to covering. You may want to re-think the high lips on the lower seat sides. Climbing up and into the cab, I found seats with a more flat lower section FAR easier to slide into (while already extending to step into the cab). ymmv

What year?

2.0" ID on the bushing (2.0" OD on the sway bar). The carrier faceplate is 2.75".

Clean looking truck and a fitting name !

btw: I ordered a set of these. Quite happy with the results.

I knew my cab wasn't locking into the full upright position (where the locking bar flattens out into the safe position). So following suggestions others have made. *image and walk-thru credited to Tom Bauer https://www.facebook.com/groups/1607576859556624/ Backed the nut off the inboard...

I've not installed mine yet. I'm waiting util I have time to take off my OEM's and test them. But Sean Fillner did a video of his installation. https://youtu.be/zU562ahYO8c

Well done ! Safe travels.

Still amazed how all this turned out (both builds). Well done !

I'll keep y'all updated. CoachGeo was the first to order these and they should be coming in pretty quick. These were the shocks. Assuming that they work, Monroe should be able to cross-ref them to a current product code. Direct Action Shock Absorber Military MRAP RG-31 BAE Systems Land...

• My sway bar bushings came in (still need to order the upper set) • Picked up a set of Monroe shocks that look like they will be a fit (will confirm upon arrival) • Started putting together my on-board tool kit • Got a new 20 ton air/hydraulic jack • Picked up a set of 12 ton jack stands • Got...

We don't. :)

Slick install ! I've always kept tenders on my Harleys and my off-road cars. I've never mounted them onto the vehicle, though. I've always the run leads to a disconnect setup on the vehicle and left the power pack inside the garage (of course, my cars were typically 12v dual batteries in...

Thanks I figured that had to be... I DID search, but didn't find one.

So I want to start putting together a toolkit for my truck. Curious what others are carrying. I feel like I'm missing something... So far I have: Glad Hand Air Hose 20 ton Air Hydraulic Bottle Jack Two 4' Breaker Bars 1 !/2" Truck Lug Wrench Torque Multiplier Lug Nut Wrench Set SAE Wrench...

SOP. Towed a car out of the sand today. Pretty much every day at the beach I get 1-5 people come ask me or flag me down for a recovery. It's actually worse when there is almost no one out there on the weekdays (fewer trucks running around to pull folks out). The big fun is late at night at...

And there were several non-runner M1078's out of TX today that fetched only the minimum bid of $4K...